Abstract:International Journal of Applied Mechanics, Ahead of Print. In this paper, an isogeometric analysis (IGA) framework based on the high-order sandwich plate theory is developed for the first time to deal with both buckling and wrinkling problems of variable-stiffness sandwich plates under compression. The present sandwich plate model is formulated based on the extended high-order sandwich plate theory (EHSAPT). The weak-form governing equations are firstly derived from the principle of virtual work, and afterward the IGA formulations based on the Non-Uniform Rational B-Splines (NURBS) are applied to predict the instability loads and the corresponding instability modes. Both the membrane and non-membrane conditions are integrated into the linear buckling analysis. The novelty of this work lies in that the employment of high-order continuous NURBS basis functions can directly fulfill the [math] continuity requirement inherent in the EHSAPT theory, which enables the EHSAPT-based IGA model to be formulated with fewer degrees of freedom. Besides, the developed EHSAPT-based IGA model has also the ability to capture the overall buckling or wrinkling modes of the sandwich plates. The accuracy and effectiveness of the proposed EHSAPT-based IGA model are verified by comparison with previously published results and those obtained using ABAQUS. Effects of the core thickness and fiber angle on the buckling behaviors of the sandwich plates are also studied in numerical examples. It is observed that the non-uniform in-plane pre-stress over the skin layers is the main reason for the non-periodic wrinkling of constant-stiffness sandwich constructions, whereas the non-uniformity of both the in-plane pre-stress and out-of-plane bending stiffness is responsible for the non-periodic wrinkling of variable-stiffness sandwich constructions. The results presented herein may be beneficial for the design of variable-stiffness sandwich constructions under compression.

Folding stress analysis of a sandwich plate based on transversely isotropic and rate-dependent constitutive relationship of adhesive

3D Stress Analysis of Composite Laminate Based on a Kind of Interfacial Element

Analysis of the Performance of Adhesively Bonded Corrugated Core Sandwich Structures Using Cohesive Zone Method

Analytical Solutions for Sandwich Plates Considering Permeation Effect by 3-D Elasticity Theory

Numerical Analysis of Sandwich Plate's Interlaminar Stress

An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates

Deployment Simulation of Foldable Origami Membrane Structures

A compressible layerwise third-order shear deformation theory with transverse shear stress continuity for laminated sandwich plates

New Method for Predicting the Wrinkling Stress in Sandwich Panels

Interfacial Modeling of Flexible Multilayer Structures

Finite element simulation investigation of warping deformation during baking temperature cycle of dissimilar materials sandwich adhesive bonded structures of car body

Shear Deformation Dominates in the Soft Adhesive Layers of the Laminated Structure of Flexible Electronics

Fracture analysis on die attach adhesives for stacked packages based on in-situ testing and cohesive zone model.

Study of Sandwich Plate System in Three-Point Bending Considering Effect of Adhesive

Interfacial Stresses Analyses of Anisotropic Conductive Adhesive Bonding Under Thermal and Humidity Loads

The Effect Of Adhesive Fillet On Mechanical Performance Of Adhesively Bonded Corrugated Sandwich Structures: An Experimental-Numerical Study

A New Material Model for 2D FE Analysis of Adhesively Bonded Composite Joints

Isogeometric Analysis for Buckling and Wrinkling of Variable-Stiffness Sandwich Plates Under Compression

Finite Element Inversion Method for Interfacial Stress Analysis of Composite Single-Lap Adhesively Bonded Joint Based on Full-Field Deformation

An energy-based analytical model for adhesively bonded stepped and simple-lap joined CFRP laminates

Mechanical simulation of foldable AMOLED panel with a module structure