Abstract:Size effect of the nickel-based single crystal superalloy DD6 is investigated in this study by performing nanoindentation experiments and finite element (FE) simulations by emphasizing the strain rate effect. An analytical method is proposed to identify whether a material has the indentation size effect (ISE) based on incremental formulations of the indentation strain rate. By taking ISE as a critical factor, the contact area is further described by considering the curvature radius of non-ideal indenters due to wear issues in practice. In order to emphasize the strain rate effect during indentations, the material parameters dominating mechanical properties are adopted from the strain rate dependent Johnson–Cook model, particular for the nickel-based single crystal superalloy. Consequently, the dimensional ISE analysis is performed by proposing a theoretical framework to establish the relationship among the indentation strain rate, the indenter tip curvature radius and the applied load–penetration depth (P–h) curve for characterizing nanoindentation responses. By identifying the indenter curvature radii and loading time as the important external factors of hardness measurement, FE simulations are validated to achieve good agreement with experimental data. The validated FE predictions are reliably employed to calibrate the dimensionless model of hardness with different indenter curvature radii and loading rates. In the proposed form of the dimensional hardness model, it is found that the indenter curvature radius can be perfectly independent of the material constitutive properties and loading rates. It reveals the potential and advantageous determination of characteristic length of materials by using nanoindentation.

Effect of Indentation Size on Strain Rate Sensitivity of Zirconia Ceramics by Nanoindentation

On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data

Indentation Size Effect in Aqueous Electrophoretic Deposition Zirconia Dental Ceramic

Strain rate effect on the mechanical properties of ZrB2-SiC ceramics characterized nanoindentation

Size Effects in Indentation Measurements of Zr–1Nb–0.05Cu Alloy

Creep-related Micromechanical Behavior of Zirconia-Based Ceramics Investigated by Nanoindentation

Nanoindentation Characterization of the Hardness of Zirconia Dental Ceramics

Effect of Strain Rate on Nano-Scale Mechanical Behavior of A-Plane (11(2)Over-Bar0) ZnO Single Crystal by Nanoindentation

Effect of Strain Rate on Nano-Scale Mechanical Behavior of A-Plane (112¯0) ZnO Single Crystal by Nanoindentation

Characterizations of specific mechanical behaviors for metallic materials with representative crystal structures using nanoindentation

Examination of the Indentation Size Effect in Low-Load Vickers Hardness Testing of Ceramics

An MD Simulation Study to the Indentation Size Effect of Polystyrene and Polyethylene with Various Indenter Shapes and Loading Rates

The Effect of Indenter Angle on the Microindentation Hardness

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Depth Dependent Strain Rate Sensitivity and Inverse Indentation Size Effect of Hardness in Body-Centered Cubic Nanocrystalline Metals

Review of indentation size effect in crystalline materials: Progress, challenges and opportunities

Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates

Indentation size effect in soft PZT ceramics with tetragonal structure close to the MPB

Strain-induced Phase Transformation Behavior of Stabilized Zirconia Ceramics Studied Via Nanoindentation.

Effect of Grain Size on Hardness, Bending Strength and Indentation Toughness of Multi-Doped Zirconia Ceramics

QUASICONTINUUM ANALYSIS OF INDENTER SIZE EFFECT IN NANOINDENTATION TESTS