Abstract:This paper presents the design, analysis, and testing of a parallel-kinematic high-bandwidth XY nanopositioning stage driven by piezoelectric stack actuators. The stage is designed with two kinematic chains. In each kinematic chain, the end-effector of the stage is connected to the base by two symmetrically distributed flexure modules, respectively. Each flexure module comprises a fixed-fixed beam and a parallelogram flexure serving as two orthogonal prismatic joints. With the purpose to achieve high resonance frequencies of the stage, a novel center-thickened beam which has large stiffness is proposed to act as the fixed-fixed beam. The center-thickened beam also contributes to reducing cross-coupling and restricting parasitic motion. To decouple the motion in two axes totally, a symmetric configuration is adopted for the parallelogram flexures. Based on the analytical models established in static and dynamic analysis, the dimensions of the stage are optimized in order to maximize the first resonance frequency. Then finite element analysis is utilized to validate the design and a prototype of the stage is fabricated for performance tests. According to the results of static and dynamic tests, the resonance frequencies of the developed stage are over 13.6 kHz and the workspace is 11.2 μm × 11.6 μm with the cross-coupling between two axes less than 0.52%. It is clearly demonstrated that the developed stage has high resonance frequencies, a relatively large travel range, and nearly decoupled performance between two axes. For high-speed tracking performance tests, an inversion-based feedforward controller is implemented for the stage to compensate for the positioning errors caused by mechanical vibration. The experimental results show that good tracking performance at high speed is achieved, which validates the effectiveness of the developed stage.

Design of a Flexure-Based Parallel XY Micropositioning Stage with Millimeter Workspace and High Bandwidth

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

A piezodriven three dimensional micropositioning stage for nano-manufacturing

Design and Analysis of a New Flexure-Based XY Micropositioning Stage with Decoupled Motion Characteristic

Design and Analysis of a New Flexure-Based XY Stage

Development of a Flexure-Based XY Positioning Stage for Micro/nano Manipulation

A Decoupled 2-Dof Flexure-Based Micropositioning Stage with Large Travel Ranges

Design of A Flexure-Based Mixed-Kinematic XY High-Precision Positioning Platform with Large Range

A Flexure-Based Kinematically Decoupled Micropositioning Stage with a Centimeter Range Dedicated to Micro/Nano Manufacturing

Design and Modeling of a Novel Monolithic Parallel XY Stage with Centimeters Travel Range

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Structural Design and Experimental Evaluation of a Coarse-Fine Parallel Dual-Actuation XY Flexure Micropositioner with Low Interference Behavior

FlexDelta: A flexure-based fully decoupled parallel $xyz$ positioning stage with long stroke

Design, Analysis and Testing of a Novel Decoupled 2-DOF Flexure-Based Micropositioning Stage

Design and analysis of a 2-degree-of-freedom flexure-based micro-motion stage

Design, Analysis and Testing of A Parallel-Kinematic High-Bandwidth Xy Nanopositioning Stage

Design, optimization, and characterization of an XY nanopositioning stage with multi-level spatial flexure hinges for high-precision large-stroke motion guidance

A Decoupled Flexure-Based Rotary Micropositioning Stage with Compact Size

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

X-Y Micropositioning Piezostage Design with Large Workspace Density