Abstract:High strain rate forming (HSRF) is promising to break through the conventional forming limit of materials and thus to form hard-to-deform components. During HSRF process, long-lasting micro-defects before fracture, i.e. adiabatic shear bands (ASBs) in compression and voids in tension, are significant characteristics existing in a large strain range. These defects bring about the non-destructive softening of stress and continuous exertion of ductility, in return, the stress responses affect the evolution of micro-defects. However, the interaction between stress responses and defects evolution has not yet been reflected in the existing models, resulting in a limited prediction accuracy. Aiming at this issue, the competition between hardening caused by thermal activated dislocation movements and the flow softening brought by micro-defects evolution was well modeled in this work. During the modeling, the relation between the normal strain and effect zone of ASBs was established via the modification of Bai-Dodd model by considering the geometric features of ASBs. Moreover, by introducing a rate-dependent ASB trace angle, the half width of ASBs was expressed as a function of maximum shear strain and critical instability strain. The effect of strain and strain rate to the evolution of voids under tensile conditions was taken into account by combining Hollomon hardening law with Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. Then, the interactions between micro-defects and structure related athermal stress were characterized by connecting volume fraction of voids and effective bearing area in tension and the intensity of flow localization with ASBs width in compression. As a consequence, a unified model of constitutive behaviors coupled with micro-defects evolution was established with considering rate-dependent hardening and softening. Applied to aluminum alloys, this model piedicts the stress responses, evolution of ASBs and voids, and low or negative strain rate sensitivity with high precision in large ranges of strain (0-0.6) and strain rate (0.001-5000 s(-1)). The proposed model is thus believed to be with a successful application in precise prediction and optimization of HSRF processes. (C) 2016 Elsevier Ltd. All rights reserved.

An Accurate and Explicit Approach to Modeling Realistic Hardening‐to‐softening Transition Effects of Metals

Realistic Hardening-to-softening Transition Effects of Metals over the Finite Strain Range Up to Failure

Unified Simulation of Hardening and Softening Effects for Metals Up to Failure

Innovative Elastoplastic J2‐flow Model Incorporating Cyclic and Non‐cyclic Failure Effects of Metals As Inherent Constitutive Features

A New, Direct Approach Toward Modeling Rate-Dependent Fatigue Failure of Metals

A Direct Approach Toward Simulating Cyclic and Non-Cyclic Fatigue Failure of Metals

Direct Simulation of Thermo‐coupled Fatigue Failure for Metals

A Unified Approach Toward Simulating Constant and Varying Amplitude Fatigue Failure Effects of Metals with Fast and Efficient Algorithms

A general physics-based hardening law for single phase metals

Direct Modeling of Multi-Axial Fatigue Failure for Metals

A generalized thermodynamic approach for modeling nonlinear hardening behaviors

Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals

User-friendly anisotropic hardening function with non-associated flow rule under the proportional loadings for BCC and FCC metals

A general yield function with differential and anisotropic hardening for strength modelling under various stress states with non-associated flow rule

A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Full Characterization of the Work-Hardening Behavior of Metals: an Accurate and Explicit Approach

A Unified Model for Coupling Constitutive Behavior and Micro-Defects Evolution of Aluminum Alloys under High-Strain-rate Deformation

A Homogeneous Anisotropic Hardening Model in Plane Stress State for Sheet Metal under Nonlinear Loading Paths.

A New, Direct Approach Toward Modeling Thermo-Coupled Fatigue Failure Behavior of Metals and Alloys

Explicit, Comprehensive Modeling of Multi-Axial Finite Strain Pseudo-Elastic Smas Up to Failure