Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

Cyclic hardening and softening behavior of the low yield point steel: Implementation and validation

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Constitutive Model for Full-Range Elasto-Plastic Behavior of Structural Steels with Yield Plateau: Formulation and Implementation

An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effects

A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation

A three-dimensional constitutive model of High Strength Structural steels

Modeling Techniques for Strain-Range-Dependent Hardening Behavior of Low-Yield-Point Steel Shear Panel Dampers

Uniaxial material model with softening for simulating the cyclic behavior of steel tubes in concrete‐filled steel tube beam‐columns

Study on Constitutive Model of Cyclic Elastoplastic Behavior of 6082-T6 Aluminum Alloy

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Stepwise Hardening Model For The Cyclic Behavior Of Shear Panel Dampers

A new constitutive model for high strength structural steels

User-friendly anisotropic hardening function with non-associated flow rule under the proportional loadings for BCC and FCC metals

Experimental and Modeling Study of High-Strength Structural Steel under Cyclic Loading

A novel constitutive model for S30408 stainless steel considering strain memory effect: Formulation and implementation

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Constitutive model for cyclic behavior of mild steel under various strain amplitudes

Constitutive Model of Low-Yield Point Steel and Its Application in Numerical Simulation of Buckling-Restrained Braces

Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals

Damage-coupled unified constitutive modeling of 316LN stainless steel including dynamic strain aging under various tension dwell time: A macroscopic phenomenological study