Abstract:A comparative experiment to determine the effect of tiny mass eccentricity in 12.7mm spin-stabilized projectiles on the position of the impact points.An artificial intelligence algorithm, Adaptive Neuro-Fuzzy Inference Systems (ANFIS), was applied to model the shooting process of the weapon system in this work.This study used Sobol's algorithm for analyzing models to calculate their global sensitivity indices and determine the four most influential factors. This will enable engineers to adjust outputs toward expected values by fine-tuning influential parameters.This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS) – in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61cm at a target range of 200m. Variance analysis indicated that the entry angle – i.e. the initial position of mass eccentricity – had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (<math>Izz</math>,<math>Iyy</math>), the mass of a projectile (<math>m</math>), the distance between nose and center of mass along the symmetry axis for a projectile (<math>Lm</math>), and the eccentric distance of the centroid (<math>Lr</math>). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.

Consistency Research On Interior Ballistic Of Small Caliber Electrothermal-Chemical Launching

A law of similitude for ballistic target ground testing

Simulation of Ballistic Performance of Coarse-Grained Metals Strengthened by Nanotwinned Regions

Experimental Research on Consistency of Plasma Ignition in Closed Bomb

Effect of spatial variability of concrete materials on the uncertain thermodynamic properties of shaft lining structure

Interior Ballistic Characteristics of Electromagnetic Rail Launcher Under Continuous Firing

Error Analysis of Interior Ballistic Calculation in the Gas and Steam Type Launch Power System

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermal-Chemical Launch with Discharge Rod Plasma Generator

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

Simulation of interior ballistic two-phase flow of storage propellant charge

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

Application of Transient Burning Rate Model of Solid Propellant in Electrothermal-Chemical Launch Simulation

The Preliminary Study of Improving DAVIS Gun Launching Capability

Methods of Measuring the Heat transfer Parameters of Liquid Propellant Explosion Fire Balls

Research on Interior Ballistic Mechanics of Electromagnetic Railgun

A novel method of internal ballistics identification and performance prediction for SRMs based on genetic algorithm

Experiment and numerical investigation on internal ballistic characteristics of L-type impulse thruster

Experimental investigation into scaling laws for conical shells struck by projectiles

Comprehensive Evaluation Method for Falling Points' Dispersion of Ballistic Missile

A calculation method of interior ballistic two-phase flow considering the recoil of gun barrel

Dispersion Internal Ballistic Model of the Rocket-borne Vehicle