Abstract:This paper investigates the three-dimensional crack propagation and damage evolution process of metallic column shells under internal explosive loading. The calibration of four typical failure parameters for 40CrMnSiB steel was conducted through experiments and subsequently applied to simulations. The numerical simulation results employing the four failure criteria were compared with the differences and similarities observed in freeze-recovery tests and ultra-high-speed tests. This analysis addressed the critical issue of determining failure criteria for the fracture of a metal shell under internal explosive loads. Building upon this foundation, the damage parameter D c , linked to the cumulative crack density, was defined based on the evolution characteristics of a substantial number of cracks. The relationship between the damage parameter and crack velocity over time was established, and the influence of the internal central pressure on the damage parameter and crack velocity was investigated. Variations in the fracture modes were found under different failure criteria, with the principal strain failure criterion proving to be the most effective for simulating 3D crack propagation in a pure shear fracture mode. Through statistical analysis of the shell penetration fracture radius data, it was determined that the fracture radius remained essentially constant during the crack evolution process and could be considered a constant. The propagation velocity of axial cracks ranged between 5300 m/s and 12600 m/s, surpassing the Rayleigh wave velocity of the shell material and decreasing linearly with time. The increase in shell damage exhibited an initial rapid phase, followed by deceleration, demonstrating accelerated damage during the propagation stage of the blast wave and decelerated damage after the arrival of the rarefaction wave. This study provides an effective approach for investigating crack propagation and damage evolution. The derived crack propagation and damage evolution law serves as a valuable reference for the development of crack velocity theory and the construction of shell damage evolution modes.

Experimental investigation into scaling laws for conical shells struck by projectiles

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Size Effects in the Axial Tearing of Circular Tubes During Quasi-Static and Impact Loadings

Crack propagation and damage evolution of metallic cylindrical shells under internal explosive loading

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Scaling the Response of Armor Steel Subjected to Blast Loading

Dynamic response of cylindrical shell supporting structure under multiple impacts: experimental and numerical investigation

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities

Experiment Research on Axial Dynamic Buckling of Thin-Wall Cylindrical Shells Based on Finite Element Model

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Dynamic responses of corrugated cylindrical shells subjected to nonlinear low-velocity impact

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation

Experimental investigation and computer simulation on dynamic buckling behavior of liquid-filled cylindrical shells under axial impact

Experimental Study of Morphology Scaling of a Projectile Obliquely Impacting into Loose Granular Media

Study on Dynamic Response and Energy Absorbing Characteristics of Shallow Spherical Shells Under Impact Loads

Expansion And Fracture Of Fragmenting Warhead Shells Of Various Materials Under A Cl-20 Explosive Charge

Experiment and numerical simulation of thin-walled cylindrical containers subjected to lateral impact

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 1: Experimental study

Mechanism of Microscopic Fracture of Typical Shell Steel under Impact Loading