Abstract:Ignition and flame stability in supersonic flow have always been the key problems of research in scramjet. In addition, ignition is difficult and the cavity flameholder is susceptible to support the flame stability under extreme conditions such as low equivalent ratio. In recent years, gliding arc plasma is recognized to expand ignition and extinction limit with lower energy consumption in the field of plasma assisted ignition due to its heating and chemical effects. In this paper, a gliding arc igniter has been designed and compared with the traditional spark plug in order to quantify the ignition ability. The igniter has the same size with the spark plug, using low-power AC gliding arc to carry out ethylene ignition test in Ma = 2.52 Ma supersonic flow. The average power of gliding arc discharge is 1199 W. A high-speed camera and CH⁎ chemiluminescence were used to make combustion diagnosis. Founded in the same discharge period, the lean ignition limit of the gliding arc is lower than the ignition limit of the spark. The average expansion of ethylene ignition limit is 17%. The ignition process is that gliding arc continues to generate the initial flame kernels during the discharge period, but it is extinguished continuously due to the strong convection. Until generating an initial flame kernel which can successfully propagate the flame. The ignition process can be divided into four stages. It continues to generate new flame kernels in flame propagation process. Gliding arc reignites the fuel and generates the new flame kernels after forming a stable flame, appearing intermittent ignition in the cavity. The high equivalent ratio can make ignition delay time shorter, generating initial flame kernels more frequently. The heating effect of the gliding arc and reignition character make the thermal product and ethylene occur intermittent combustion more often in the cavity, increasing the area of the combustion reaction. Gliding arc plasma can achieve combustion enhancement during the flame stabilization process. The shear layer of flame thickness increased by the average of 2 mm on S-B-1 and G-B-1 conditions. Compared with the traditional spark ignition, gliding arc broaden the lean blow-off limit in different stages may be the significant reason for broadening lean ignition limit. It concludes that gliding arc makes the flame's ignition limit closer to the flame's blow-off limit.

Experimental Research on Consistency of Plasma Ignition in Closed Bomb

Study on the Solid Propellant Burning Rate Enhanced by Plasma in the Closed Bomb

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Experimental Investigation of the Flame Front Propagation Characteristic During Light-round Ignition in an Annular Combustor

Research on the Dynamic Model of Plasma Ignition Process of Solid Propellant

Study on the Characteristics of Different Plasma Ignition Schemes

A model for plasma ignition of solid propellant

Experimental Study on Plasma Ignited Single-base Propellant Using SEM and EDS

Experimental Study on Single Ignition of Solid and Liquid FAE

Study of the Enhanced Burning Rate During the Plasma-Propellant Interaction Process

Consistency Research On Interior Ballistic Of Small Caliber Electrothermal-Chemical Launching

Experimental Investigation on Flow Characteristics and Ignition Performance of Plasma-Actuated Flame Holder

Effect of Shock Wave Formation on Propellant Ignition in Capillary Discharge

Experimental Investigation on Ignition of Hyperburner Based on Gliding Arc Plasma Igniter Driven by Pressure Difference

A numerical determination of complex solid gun propellant burn rates through closed bomb simulation

Study on the Influences of Turbulent Characteristic Parameters on Premixed Combustion in a Constant Volume Bomb

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

Experimental investigation on spray and ignition characteristics of plasma actuated bluff body flameholder

Experimental Investigation on Gliding Arc Discharge Plasma Ignition and Flame Stabilization in Scramjet Combustor

An Experimental System of Constant Volume Combustion Bom Bwith Variable Turbulence Parameters

Ignition Enhancement of Lean Propane/air Mixture by Multi-Channel Discharge Plasma under Low Pressure