Abstract:As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can significantly improve the dewatering of paper sheets. Therefore, it can be concluded that if CPGMA has little effect on paper properties, it will have potential industrial value in the papermaking industry. Consequently, it is necessary to further study the effect of the CPGMAs@CPAM/SiO2/APAM system on paper properties. To evaluate the application potential of the system in the papermaking industry, we investigated the effects of CPGMAs, which replaced the fibers in the stocks, on the paper properties in the CPAM/SiO2/APAM system. The findings demonstrate that as the CPGMA replacement increased, the paper's tensile strength, bursting strength, tear resistance, and folding endurance all declined. The trend can be segmented into two phases: a rapid decrease for substitution amounts below 0.5% and a gradual decline for substitution amounts exceeding 0.5%. When replaced with a small amount of CPGMAs, there was a negligible effect on these properties. Second, the paper air permeability increased with the CPGMA substitution amount in the stock. Furthermore, the trend of paper air permeability can be divided into two stages—a rapid stage with a substitution amount of 0.5%. A small amount of CPGMAs could distinctly improve the paper's air permeability. Third, CPGMAs, which replaced fibers in the stock, minutely affected the paper formation. A small amount of CPGMAs substantially boosted the efficacy of the process of paper manufacture and certain characteristics of the paper, and it had a negligible impact on the strength of paper. The CPGMAs@CPAM/SiO2/APAM technology has the potential to improve the retention and filtration performance of CPAM/SiO2/APAM.

Evaluation On Application Properties Of Penetrant In P-Rc Apmp Made From Italy Polar

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Kaolin Filling and Hand-Sheet Property in Dual Polymer Retention System

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Comparison of the internal functionalization and surface modification methods of chemi-mechanical pulp handsheets using nanocellulose, chitosan, and DTPA

Study On The Mixture Of Bleached Kraft Pulp With P-Rc Apmp Produced By Partially Substituting Mg(Oh)(2) For Naoh

Comparison of Interfiber Bonding Ability of Different Poplar P-Rc Alkaline Peroxide Mechanical Pulp (apmp) Fiber Fractions

Perylene-Based Fluorescent Sizing Agent for Precise Evaluation of Permeability and Coating Property of Sizing Paste

The Characteristics of Various Fiber Fractions of P-RC APMP

High Yield Poly(ethylene- alt-maleic acid) Grafting to Wood Pulp while Minimizing Fiber/Fiber Wet Adhesion

Effect of chitosan and cationic polyacrylamide on optical and mechanical properties of paper made from chemi-mechanical pulps

Enhancing subsequent kraft fiber dewatering properties by using fiber polyamide-epichlorohydrin (PAE) treatment to prepare a dry pulp product,

Effects of Enzyme Pretreatment on the Beatability of Fast-Growing Poplar APMP Pulp

Achieving Refining Energy Savings and Pulp Properties for Poplar Chemithermomechanical Pulp Improvement Through Optimized Autohydrolysis Pretreatment

Effect of Sheet Properties of Cellulosic Polyglycidyl Methacrylate-Grafted Fibers in a Cationic Polyacrylamide/SiO2/Anionic Polyacrylamide Retention Aid System

The eco-friendly surface modification of textiles for deep digital textile printing by in-line atmospheric non-thermal plasma treatment

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content