Abstract:This study investigates the enhancement of compatibility between natural reinforcement materials and polymer matrices, with a focus on Alfa fibers polypropylene (PP) composites. Composites Alfa fibers/PP are prepared using untreated and treated alfa fibers and with or without the addition of a MAPP compatibilizing agent. Firstly, Alfa fibers extracted from the plant are categorized into two groups: untreated and treated with a 3% (wt/v) alkaline solution followed by bleaching. This chemical treatment significantly increases the cellulose content and crystallinity index of the fibers, with improvements of 39.7% and 13.6%, respectively. Secondly, the study incorporates 5 wt% MAPP in the PP matrix as a compatibilizer. The composites produced with 30 wt% of alfa fibers are processed using a single screw extruder, followed by injection molding. Composites samples obtained are characterized using various methods. Thermal analysis reveals that the incorporation of chemically treated alfa fibers along with MAPP significantly accelerates the crystallization rate of the PP matrix, indicating the fibers' role as effective nucleating agents. Mechanical testing shows marked improvements in the Young's modulus and tensile strength of the composites obtained with treated alfa fibers reinforcing the MAPP-PP matrix, with increases of 1.67% and 4.61% over their untreated counterparts, respectively. 本研究调查了天然增强材料与聚合物基体之间相容性的增强,重点研究了阿尔法纤维聚丙烯(PP)复合材料. 阿尔法纤维/PP复合材料是使用未经处理和处理的阿尔法纤维制备的,并添加或不添加MAPP增容剂. 首先,从植物中提取的阿尔法纤维分为两组: 未经处理和用3%(wt/v)碱性溶液处理,然后漂白. 这种化学处理显著提高了纤维的纤维素含量和结晶度指数,分别提高了39.7%和13.6%. 其次,该研究将5 wt%的MAPP作为增容剂掺入PP基体中.用30重量%的alfa纤维生产的复合材料使用单螺杆挤出机加工,然后进行注塑成型. 使用各种方法对获得的复合材料样品进行表征. 热分析表明,化学处理的alfa纤维与MAPP的结合显著加速了PP基体的结晶速率,表明纤维是有效的成核剂. 机械测试表明,用处理过的alfa纤维增强MAPP-PP基体获得的复合材料的杨氏模量和拉伸强度显著提高,分别比未处理的相应材料提高了1.67%和4.61%.

The Characteristics of Various Fiber Fractions of P-RC APMP

Comparison of Interfiber Bonding Ability of Different Poplar P-Rc Alkaline Peroxide Mechanical Pulp (apmp) Fiber Fractions

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Drawing and Ultimate Tensile Properties of Modified Polyamide 6 Fibers

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study On The Mixture Of Bleached Kraft Pulp With P-Rc Apmp Produced By Partially Substituting Mg(Oh)(2) For Naoh

Evaluation On Application Properties Of Penetrant In P-Rc Apmp Made From Italy Polar

Effects of Enzyme Pretreatment on the Beatability of Fast-Growing Poplar APMP Pulp

Structure and Properties of New Aramid Pulp Short Fibre/cr Composite

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Studies Upon the Structure and Properties of Cotton/Wood Pulp Blends Cellulose Acetate Fiber

Study on the reinforcing characteristics of aramid pulp ultrafine short fibers in CR matrix

Physico-Thermal and Mechanical Characterization of Alfa Fiber/Polypropylene Composites: Effects of Fiber Treatment and MAPP Compatibilization

Different Surface Treatments of Carbon Fibers and Their Effects on Interfacial Performance of Polytriazole Composite

Study on Effect of Surface Treating Method on Mechanical Behavior of Three Plant Fiber Reinforced Polypropylene Composites

Effluent Characteristics and Pulp Properties Changes with the Partially Substituting MgO for NaOH in the High-Consistency Retention Stage of Triploid Poplar P-RC APMP

AIR COLD PLASMA MODIFICATION ON PBO FIBER SURFACE

Effect of Fiber Type and Content on Mechanical Property and Lapping Machinability of Fiber-Reinforced Polyetheretherketone