Abstract:Unidirectional carbon fiber reinforced polymer (UD-CFRP) composites designed for ultimate tensile strength and stiffness along the fiber direction are vulnerable in the transverse direction. In this study, UD-CFRPs were reinforced in the transverse direction using sparsely distributed hierarchical Aramid pulp (AP) micro/nano-fibers between 2 and 8 g per square meter (gsm) per ply interface. Those AP micro/nano-fibers, a few hundred microns in length, effectively formed an ultra-thin interleaving layer around 20 mu m in thickness between carbon fiber plies. Flexural properties along and perpendicular to continuous carbon fiber direction were measured under three-point-bending (3-P-B) to determine the toughening effects of AP. Flexural loads in both longitudinal and transverse directions have been enhanced by 30% and over 100% respectively from those randomly distributed AP micro/nano-fibers with diameters varied from a few hundred nanometers to 10 mu m. Even slight increase in the elastic modulus of AP-toughened CFRP along the fiber direction was observed. Total fracture energy absorption, initial cracking and final fracture loads were measured and compared, indicating AP micro/nano-fibers have contributed to the high strength, high toughness and high modulus characteristics of AP-interleaved UD-CFRPs. Details on toughening mechanisms were revealed from SEM and cross-section optical microscopy examinations. Comparisons of unreinforced UD-CFRP and AP-toughened UD-CFRP showed the hierarchical AP micro/nano-fibers indeed played an important role in composite microstructure design and property optimization. The ultra-thin interleaved AP veil around 20 mu m in thickness can be conveniently incorporated into pre-preg fabrication so that the extra interleaving step can be eliminated, i.e. the toughened pre-pregs can be used as normal pre-pregs in the final composite forming.

Study on the reinforcing characteristics of aramid pulp ultrafine short fibers in CR matrix

Reinforcing Mechanism of Novel Aramid Pulp Short Fibre in Chloroprene Rubber Matrix

Structure and Properties of New Aramid Pulp Short Fibre/cr Composite

Preparation, structure and properties of short para aramid fiber/ hydrogenated nitrile-butadiene rubber composites

Study on Microstructure and Mechanical Properties Relationship of Short Fibers/rubber Foam Composites

Application of aramid pulp fibres in NR/BR tire tread

Abrasion behavior of natural rubber reinforced with aramid short fiber

Mechanical properties and reinforcement mechanisms of hydrogenated acrylonitrile butadiene rubber composites containing fibrillar silicate nanofibers and short aramid microfibers

Transverse and Longitudinal Flexural Properties of Unidirectional Carbon Fiber Composites Interleaved with Hierarchical Aramid Pulp Micro/nano-Fibers

Characterization of NR/SBR/BR Blends Reinforced by Modified Nano-CaCO_3

Progress in nano-short fiber reinforced rubber composites

STUDY OF IN-SITU MICRO-FIBRE OF EPDM/PA

Anisotropy of chloroprene rubber composites reinforced with fibrillar silicate

Comparative study on flexural performances of carbon fiber reinforced polymers with micro‐, micro‐/nano‐, and nano‐sized aramid fiber interlayers

Structure and Properties of Silicate Nano-Fiber/rubber Composites

Mechanical design of rubber-based sealing composites reinforced with short non-asbestos fibers

Influences of fiber fibrillation degree on mechanical and tribological performances of aramid fiber/nitrile rubber composites

Improvement of interfacial strength and fatigue stability of aramid fiber/rubber composites by constructing multiscale interphase structures

Reinforcing Behavior of Reclaimed Rubber Filled Natural Rubber Composites

Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites

Study of in-situ micro-fibre of DPDM/PA