Abstract:Reinforcement mechanism of short carbon fibers in 3D‐printed short‐continuous carbon fiber reinforced thermoplastic composites. 3D printing of continuous carbon fiber reinforced thermoplastic (C‐CFRTP) composites is a promising fabricating process to achieve complex lightweight structures within a short time; nevertheless, low mechanical performance between printed layers is always a limitation. Adding short carbon fibers during C‐CFRTP fabrication could achieve short‐continuous carbon fiber reinforced thermoplastic (S/C‐CFRTP) composites with enhanced mechanical properties. However, the underlying reinforcement mechanism is not well understood, which hinders the optimization of 3D printing process for S/C‐CFRTP. This paper investigates reinforcing behavior of short carbon fibers and impregnation behavior of the matrix (short carbon fiber reinforced PA6) under various 3D printing conditions. The results indicate that promoting both reinforcing and impregnation behaviors during S/C‐CFRTP 3D printing can improve mechanical performance. As short carbon fiber content increases, the mechanical performance initially experiences enhancement caused by the reinforcing behavior of short fibers, followed by a decline attributed to the insufficient impregnation of the molten matrix. Higher nozzle temperatures facilitate the impregnation behavior of the molten matrix, resulting in superior mechanical performance. Moreover, by leveraging the reinforcement mechanism, the optimal parameter combination is proposed to improve tensile, flexural, and interlaminar shear strengths of the 3D‐printed S/C‐CFRTP to approximately 368.27, 319.80, and 20.09 MPa, respectively. Highlights Reinforcement mechanism is revealed by reinforcing and impregnation behaviors. Short carbon fiber content affects both reinforcing and impregnation behaviors. Beyond 15 wt%, short carbon fiber content shows adverse effects on performance. High nozzle temperature promotes impregnation behavior to improve performance. Optimal parameters raise 19.8% tensile, 39.9% flexural and 161.2% shear strength.

Reinforcing Mechanism of Novel Aramid Pulp Short Fibre in Chloroprene Rubber Matrix

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Improved mechanical properties and special reinforcement mechanism of natural rubber reinforced by in situ polymerization of zinc dimethacrylate

Reinforcing Behavior of Reclaimed Rubber Filled Natural Rubber Composites

Experimental Research on Mechanical Performance of Hybrid Fiber Reinforced Cementitious Composites with Polyvinyl Alcohol Short Fiber and Carbon Textile

A New Approach to Rubber Reinforcement

A feasible way to modify microcrystalline cellulose powder and its reinforcing effect for NBR composites

Preparation of aramid nanofiber and its application in polymer reinforcement: A review

Aramid Nanofiber/XNBR Nanocomposite with High Mechanical, Thermal, and Electrical Performance

Preparation of immiscible XSBR/PAM composite by constructing a leaf vein bionic nano-micro structure

Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion

Effect of Aramid Pulp and Lapinas Fiber on the Friction and Wear Behavior of NBR Powder–Modified Phenolic Resin Composite

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)

Characterization of NR/SBR/BR Blends Reinforced by Modified Nano-CaCO_3

Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites

Study on short fiber reinforcement mechanism for mechanical performance improvement of 3D‐printed short‐continuous carbon fiber reinforced thermoplastic composites

Preparation of Reinforcement of Aramid Fiber and Fiberglass

The Effect of Surface Pretreatment of Aramid Fiber on the Performance of Non-asbestos Sealing Material

Surface modification of nylon 66 fiber and its reinforcement of coordination crosslinked acrylic rubber

Enhanced interfacial adhesion of aramid fiber reinforced rubber composites through bio‐inspired surface modification and aramid nanofiber coating