Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

A New Method For Calculating Notch Tip Stresses And Strains Based On Neuber Method And Esed Method Under Multiaxial Loading

A Modified Method for Calculating Notch-Root Stresses and Strains under Multiaxial Loading

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Further Investigation of Neuber's Rule and the Equivalent Strain Energy Density (ESED) Method

Simplified method to identify full von Mises stress-strain curve of structural metals

Study on Multiaxial Stress-Strain Curve with Three-Dimensional Approximate Method

A new adjustable localization operator method to compute local stresses and strains at notched bodies under multiaxial cyclic loading

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

A New Modified Algorithm for Elastic Plastic Fem - Quasi Chord Modulus Method

Numerical and experimental analysis of the notch effect on fatigue behavior of polymethylmethacrylate metal based on strain energy density method and the extended finite element method

Study and Application on Anisotropic Multiaxial Approximate Stress and Strain Analysis Method

A Time-Dependent Stress and Strain Estimation Method for Notched Components under Displacement-Controlled Condition

Analysis on the fatigue damage evolution of notched specimens with consideration of cyclic plasticity

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

Influencing Factors on Local Stress-Strain Responses of Notched Specimen

Local Stress–Strain Estimation for Tenon Joint Structure under Multiaxial Cyclic Loading at Non-isothermal High Temperature

A New Method for Studying the Effect of Multiaxial Strain States on Low Cycle Non-Proportional Fatigue Prediction

Research on multiaxial fatigue life of notched specimens based on Weibull distribution and Bayes estimation

Stress-strain Calculation and Fatigue Life Assessment of V-shaped Notches of Turbine Disk Alloys

An Improved Semi-Analytical Solution for Stress at Round-Tip Notches