Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

Study and Application on Anisotropic Multiaxial Approximate Stress and Strain Analysis Method

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Further Investigation of Neuber's Rule and the Equivalent Strain Energy Density (ESED) Method

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

Simplified method to identify full von Mises stress-strain curve of structural metals

An Investigation of Testing Methods on the Biaxial Mechanical Behaviors of Anisotropic Materials

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

Biaxial Experiments and Numerical Analysis on Stress-State-Dependent Damage and Failure Behavior of the Anisotropic Aluminum Alloy EN AW-2017A

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

On multiaxial creep–fatigue considering the non-proportional loading effect: Constitutive modeling, deformation mechanism, and life prediction

Stabilized cyclic stress‐strain calculation for metals under multiaxial loading

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

Semi-quantitative creep-fatigue damage analysis based on diffraction-based misorientation mapping and the correlation to macroscopic damage evolutions

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Stress Rupture Life Prediction Method for Notched Specimens Based on Minimum Average Von Mises Equivalent Stress

A topologized resolved shear stress method for the life prediction of nickel-base single crystal superalloys

Influences of stress states and loading directions on the anisotropic fracture of magnesium alloy AZ31B sheet under tension-dominated forming conditions

Stress Triaxiality in Anisotropic Metal Sheets—Definition and Experimental Acquisition for Numerical Damage Prediction

The Drucker–Prager criterion-based plasticity theory of amorphous alloys under the complex stress states

New strain energy-based critical plane approach for multiaxial fatigue life prediction

Numerical Analysis of Experiments on Damage and Fracture Behavior of Differently Preloaded Aluminum Alloy Specimens