Abstract:Thermo-mechanical coupling effect often occurs during the deformation of the metallic materials, especially when they are subjected to cyclic loadings at a high loading rate. On one hand, the internal heat generation and accumulation originated from the energy dissipation during plastic deformation lead to the change of temperature field in the material. On the other hand, the variation of temperature field further changes the dissipation property of the material, since the stress-strain response depends on the temperature. These two factors influence with each other and result in a complex thermo-mechanical coupling effect. In this work, a dual-scale thermo-mechanically coupled elasto-viscoplastic constitutive model is developed to predict the monotonic, cyclic deformation and temperature field evolution of metallic materials under monotonic and cyclic loadings. At the mesoscopic scale, the polycrystalline representative volume element (RVE) is considered as an aggregation of individual grains. For an individual grain, a crystal plasticity model accounting for the internal heat generation is developed based on the fundamental laws of irreversible thermodynamics. A nonlinear kinematic hardening rule extended from the Ohno-Abdel-Karim model is adopted to capture the evolution of resolved shear back stress for each slip system, and the classical Bassani-Wu latent hardening rule is utilized to describe the interaction of dislocation slipping. To calculate the thermo-mechanical interactions among the grains, and obtain the overall responses of the polycrystalline RVE, a self-consistent (SC) homogenization scheme accounting for material nonlinearity and thermo-mechanical coupling effect is developed. At the macroscopic scale, the thermo-mechanical responses for the specimen are obtained by solving the equations of force balance, deformation compatibility, thermodynamic equilibrium and constitutive relationship through an approximation method. Finally, the proposed model is validated by predicting the monotonic, cyclic stress-strain responses and temperature evolution of 316L stainless steel.

Local Stress–Strain Estimation for Tenon Joint Structure under Multiaxial Cyclic Loading at Non-isothermal High Temperature

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Simplified method to identify full von Mises stress-strain curve of structural metals

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

Constitutive modelling for strain–hardening alloys during isothermal compression: An efficient semi-empirical method coupling the effects of strain, temperature and strain-rate

A General Temperature-Dependent Stress–Strain Constitutive Model for Polymer-Bonded Composite Materials

Stabilized cyclic stress‐strain calculation for metals under multiaxial loading

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

A dual-scale elasto-viscoplastic constitutive model of metallic materials to describe thermo-mechanically coupled monotonic and cyclic deformations

A new adjustable localization operator method to compute local stresses and strains at notched bodies under multiaxial cyclic loading

Development of dynamic constitutive model of epoxy resin considering temperature and strain rate effects using experimental methods

Stress-strain models and numerical simulations of steel headed studs at low temperatures

Elastoplastic Mechanical Properties and Kinematic Hardening Model of 35CrNi3MoVR

A strain rate dependent thermo-elasto-plastic constitutive model for crystalline metallic materials

Dynamic Mechanical Properties and Modified Material Constitutive Model for Hot Forged Ti2AlNb over Wide Ranges of Temperature and Strain Rate

Study on geometric optimization for new type of steel mortise and tenon joint based on performance

Constitutive Modeling of Annealed OFHC with Wide Strain-Rate and Temperature Effects: Incorporating Dislocation Dynamics and Normalized Microstructural Size Evolution

Modeling of the thermal softening of metals under impact loads and their temperature–time correspondence