Abstract:A new kind of IR imaging system which is based on MEMS microcantilever has conic out in recent years. The infrared radiation detection and the subsequent reconstruction of an image are based oil the deflection of individual microcantilever pixels. This detection is applied in an optical way, which means there is no electrical contact to each individual pixel. This approach has drawn considerable attention due to the advantages of low cost, light weight, low power consumption, high reliability and no back-ground electrothermal noise.Firstly the incoming IR light is blocked and an image of the microcantilever array is captured by a camera as a background image before an optical readout process. Then the IR light is let in and the difference between the background image and the current image captured is calculated and exported as an IR video signal. This process has a critical demand on light power stability, A CCD of 12 bit resolution is used to achieve a high signal to noise ratio. Its resolution is 4096 which means it call detect a light power changing of 1/4096 or 0.02% theoretically. The instability of common lasers is a few percent and the long time instability of LED light sources can be about 1%. These instabilities are all larger than 1/4096. The power variation call be detected by the CCD if these lasers or LEDs are used as the light source in the system. This power variation will affect the signal to noise ratio of an output IR signal.We have done sonic experiments in this paper. The laser power stabilizer consists of an electro-optical modulator and an optical feedback system. The peak-to-peak instability of the laser output power reaches within 0.1% in a few minutes. The stabilized laser beam is applied to the optical readout process. The experiment shows that the output IR image is much more stable than before. The drift of light power is almost eliminated. The NETD of the whole system reaches about 2 K.

Improving Laser Power Stability with a Photosensitive Lens

Stabilization of Laser Beam Position Based on a Closed-Loop Fast Steering Mirror System

One-thousandth-level Laser Power Stabilization Based on Optical Feedback from a Well-Designed High-Split-ratio and Nonpolarized Beam Splitter.

External digital power stabilization system for levitated optomechanics sensor

Stabilizing the Output Power of the All-solid-state Green Laser by Optoelectronic Feedback

Application Of A Power Stabilized Laser To The Uncooled Infrared Imaging System

Passive laser power stabilization via an optical spring

Laser Power Stabilization with a Cesium FADOF

Nonlinear Optical Stabilization of 1064-Nm Laser Pulses with a Two-Photon Absorbing Liquid-Dye Salt System

Development of the Stabilization of Laser Diode

A Method on Laser Power Stabilization in Optical Detection Cesium Atomic Clock

Design and Implementation of Miniaturized Frequency-Stabilized Laser System with Low Power Consumption

Frequency Stabilization of a 214.5-Nm Ultraviolet Laser

Improvement of Laser Frequency Stabilization for the Optical Pumping Cesium Beam Standard

Research of power stability for 3kW RF slab CO2 laser

Active Stabilization of Laser Diode Injection Using a Polarization-Spectroscopy Technique

397.5 Nm Ultra-Violet Laser Power Stabilization Based on Feedback Control Via Acousto-Optic Frequency Shifter

Laser power stabilization for the detection of the populations of the atomic double levels in Cs fountain clock

High-precision and fast-response laser power stabilization system for cold atom experiments

Study on Optical Stabilizer of Semiconductor Laser Controlled by Monolithic Microcomputer

Stability of Output Optical Power of Argon Ion Laser and Application of Optical Feedback