Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration
Qiuyan Huang,Yang Liu,Aiyue Zhang,Haoxin Jiang,Hucheng Pan,Xiaohui Feng,Changlin Yang,Tianjiao Luo,Yingju Li,Yuansheng Yang
DOI: https://doi.org/10.1016/j.jmst.2019.06.025
IF: 10.319
2020-02-01
Journal of Materials Science and Technology
Abstract:This article aims to explore the age hardening responses of both as-extruded and as-aged Mg-2.5Sn-1.5Ca-xAl alloys (x = 2.0, 4.0 and 9.0 wt%, termed TXA322, TXA324 and TXA329, respectively) through microstructural and mechanical characterization. Results indicate that grain size of as-extruded TXA322, TXA324 and TXA329 alloys were ∼ 16 μm, ∼ 10 μm and ∼ 12 μm, respectively. A number of <a> and <c+a> dislocations were observed in all the as-extruded samples. Guinier – Preston (GP) zones were evidently identified in TXA322 alloy, while only a small number of Mg17Al12 phases existed in both TXA324 and TXA329 alloys. An aging treatment facilitated the precipitation of a high number density of GP zones within the matrix of TXA322 alloy. In contrast, no obvious nano-precipitates were in as-aged TXA324 alloy. Numerous nano-Mg17Al12 phases were formed through a following aging treatment in TXA329 alloy. In terms of mechanical properties, it is apparent that an increment in ultimate tensile strength of ∼ 46 MPa and ∼ 40 MPa was yielded in peak-aged TXA322 and TXA329 alloys, while no obvious variations in UTS were present in peak-aged TXA324 alloy, in comparison with the as-extruded counterparts.
materials science, multidisciplinary,metallurgy & metallurgical engineering