Abstract:Ruled surfaces found in engineering parts are often blended with a constraint surface, like the blade surface and hub surface of a centrifugal impeller. It is significant to accurately machine these ruled surfaces in flank milling with interference-free and fairing tool path, while cur-rent models in fulfilling these goals are complex and rare. In this paper, a tool path planning method with optimal cutter locations (CLs) is proposed for 5-axis flank milling of ruled surfaces under mul-tiple geometric constraints. To be specific, a concise three-point contact tool positioning model is firstly developed for a cylindrical cutter. Different tool orientations arise when varying the three contact positions and a tool orientation pool with acceptable cutter-surface deviation is constructed using a meta-heuristic algorithm. Fairing angular curves are derived from candidates in this pool, and then curve registration for cutter tip point on each determined tool axis is performed in respect of interference avoidance and geometric smoothness. On this basis, an adaptive interval determina-tion model is developed for deviation control of interpolated cutter locations. This model is designed to be independent of the CL optimization process so that multiple CLs can be planned simultaneously with parallel computing technique. Finally, tests are performed on representative surfaces and the results show the method has advantages over previous meta-heuristic tool path planning approaches in both machining accuracy and computation time, and receives the best com-prehensive performance compared to other multi-constrained methods when machining an impel-ler. (c) 2023 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).

A NEW TOOL PATH PLANNING MODEL OF COMPUTER AIDED MANUFACTURING (CAM) FOR FREEFORM SURFACES

EQUIVALENT NORMAL CURVATURE APPROACH MILLING MODEL OF MACHINING FREEFORM SURFACES

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

On Initialization of Milling Paths for 5-Axis Flank CNC Machining of Free-Form Surfaces with General Milling Tools

An Adaptive Constant Scallop-height Tool-Path Planning Method For Turn-Milling Machining of NURBS free-form surfaces

Machining Speed Enhancement for Free-form Surface of Cross-sectional Design Based on Step Length Optimization

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Barrel Cutter Design and Toolpath Planning for High-Efficiency Machining of Freeform Surface

Tool path planning for five-axis flank milling of free-form surfaces

Combining Physical Shell Mapping And Reverse-Compensation Optimisation For Spiral Machining Of Free-Form Surfaces

Tool path generation for 5-axis flank milling of ruled surfaces with optimal cutter locations considering multiple geometric constraints

CNC Tool Path Generation for Freeform Surface Machining Based on Preferred Feed Direction Field

Experimental Investigation on Various Tool Path Strategies Influencing Surface Quality and Form Accuracy of CNC Milled Complex Freeform Surface

An Adaptive Toolpath Planning Method for NC Machining of Free-form Surfaces

Generic Tool path planning method of T-spline surface CNC milling

Shape-adaptive CNC Milling for Complex Contours on Deformed Thin-Walled Revolution Surface Parts

Study on 5-axis End Milling of Free-form Surfaces

Towards Efficient 5-Axis Flank CNC Machining of Free-Form Surfaces Via Fitting Envelopes of Surfaces of Revolution

A New Dynamics Analysis Model for Five-Axis Machining of Curved Surface Based on Dimension Reduction and Mapping

Modeling Swept Envelopes of Rotary Cutting Tools with Application to Five-axis Flank Milling