Abstract:Five-axis flank milling has been widely used in industry because of its high material removal rate, low tool loss, and achievement of good surface quality. The cutting force, which is the basis for studying the milling process, is mainly determined by the cutting coefficients, spindle speed, feed rate, and cutter-workpiece engagement (CWE). However, due to the complex spatial motion of the cutting tool, extracting the CWE with high precision and efficiency in five-axis flank milling has become a challenging topic. This paper proposes a novel and integrated solid-discrete-based method to identify the CWE data in a flank milling workpiece with ruled surfaces. In this method, the tool path and cutting location source (CLS) file of certain tool/workpiece combinations are obtained by commercial CAM software. Two cutting types, first cut and following cut, are considered. First, the point cloud data of the machining surface are extracted, and the instantaneous contact profile of the tool and the workpiece is obtained according to the tool geometry information at different cutting location points. The feasible contact surface is then constructed based on an analysis of the surface normal and instantaneous feed direction at the arbitrary tool point. After trimming the contact profile by the feasible contact boundary, the exact CWE can finally be extracted. Compared with the existing methods for CWE extraction, the proposed method replaces the solid model with discrete coordinate points in the calculation process and is thus more suitable for system integration. Experiments and applications show that this method has high accuracy and computational efficiency.

Tool path planning for five-axis flank milling of free-form surfaces

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Tool-path planning method for kinematics optimization of blade machining on five-axis machine tool

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

A NEW TOOL PATH PLANNING MODEL OF COMPUTER AIDED MANUFACTURING (CAM) FOR FREEFORM SURFACES

An accurate surface error optimization for five-axis machining of freeform surfaces

Research Progress in Tool Path Planning for Five-axis End Milling Machining of Sculptured Surfaces

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

Iso-Planar Feed Vector-Fields-Based Streamline Tool Path Generation for Five-Axis Compound Surface Machining With Torus-End Cutters

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

Tool orientation planning for five-axis CNC machining of open free-form surfaces

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

A solid-discrete-based method for extracting the cutter-workpiece engagement in five-axis flank milling

CNC Tool Path Generation for Freeform Surface Machining Based on Preferred Feed Direction Field

Tool path generation and optimization method for pocket flank milling of aircraft structural parts based on the constraints of cutting force and dynamic characteristics of machine tools

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints