Abstract:In this paper, a microstrip Wilkinson power divider (MWPD) based on particle swarm optimization (PSO) algorithm is designed, simulated, and fabricated using novel resonators. In addition, attenuators and open-ended stubs are incorporated to generate a broad cut-off band and reduce unwanted harmonics. The proposed power divider has a central frequency of 1 GHz. The performance of each used resonator is analyzed based on lumped-element circuit models.The L and C parameters of the equivalent circuit of the used resonators are predicted and optimized with the assistance of the PSO method. The subsequent phase was the fabrication of the proposed MWPD, after which its performance was evaluated in the light of the results obtained from the simulation. It was discovered that there was a high degree of concordance between the two. On the other hand, the fabricated circuit has several benefits, including a suitable S12 of - 3.15 dB, a high return loss of less than - 24 dB at the operating frequency, a compact size of 0.058 λ g × 0.064 λ g , and the ability to remove undesired harmonics. The results show a high level of suppression of the unwanted harmonics (up to the 16th harmonic) and a great responsiveness in the passband, while having very low ripple. As a result, the proposed circuit may be used in a wide variety of electronic devices, such as radar transmitter and receiver circuits, and many other high-frequency systems.

Novel Low Cost 1-to-4 Microstrip Wilkinson Power Divider

A new design of compact microstrip Wilkinson power dividers

Stub-Loaded Wilkinson Power Divider with Performance Enhancement.

A New Quad-Band Wilkinson Power Divider

A simple design of low-loss quad-band Wilkinson power dividers

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements

A tri-band Wilkinson power divider using extended T-shaped stubs

A New Dual-Band Wilkinson Power Divider

A 1–4 In-Phase Power Divider for 5G Wireless Communication System

Design Simulation and Production of Broadband Wilkinson Power Divider

Ultra-Compact Wideband Dual-Mode Wilkinson Power Divider Based On Thin Film Integrated Passive Device Fabrication Technology

Miniaturized Microstrip Wilkinson Power Divider with EBG Structure

Design of a microstrip Wilkinson power divider using a low pass filter with the particle swarm optimization algorithm

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line

Dual-band Wilkinson Power Divider Based on SS-CML

A THz One-to-four Power Divider with High Isolation and Arbitrary Phase Shift

A Band-Notched Ultra-Wideband 1 to 4 Wilkinson Power Divider Using Symmetric Defected Ground Structure

Compact Ultra-Wideband Wilkinson Power Divider in Parallel Stripline with Modified Isolation Branches

Analysis and design of a novel coupled-line wideband Wilkinson power divider

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Design of 1 ～18 GHz Ultra-wideband Power Divider