Abstract:Efficient improvement of paper strength while optimized sizing technique remains challenging and fascinating since specialty paper are required to low-cost, high printing quality and environmental sustainability. Herein, a novel controlled reactivity polyester glycol-based cross-linker (TBPU) applied in paper surface sizing was exploited by simple two-steps polymerization and blending process. An end-blocked structure design strategy of containing densely distributed multiple soft segments and active hydrogen nucleophilic segments (Butanone oxime, MEKO as end closure units) in isocyanate dispersion was achieved to address the scarcity of mechanical properties and the inconvenient in surface-sizing progress. TBPU can block the –NCO groups in IPDI segments at 60°C, and –NCO groups can be deblocked at the temperature higher than 110°C, which endow TBPU with latent cross-linking property. Afterward, we took advantage of the structural feature of polyhydroxy compounds and the adhesion to cellulose via using polyvinyl alcohol (PVA) as a blending component to form TBPU/PVA emulsion. The organization of –NCO groups react with hydroxyl groups, carbamate groups cross-linked with hydrogen bonds, and crystallized PCL segments generates phase-separated hierarchical domains. Serving as high-reactivity paper-sizing fillers capable of cross-linking and disintegration under an external change of temperature, the hierarchical domains can strengthen the specialty papers and enhance their water resistance and ink adhesion. The influences of TBPU content, PVA content and –NCO/–OH molar ratio on the physicochemical properties of the resultant emulsions and sized paper have been investigated. As a result, the paper sized with TBPU-1.6/PVA emulsion exhibit a tensile index of ≈107.19 Nm/g, a tearing index of ≈11.79 m N • m2/g, a folding resistance of ≈4511 s, an optimum blending temperature of 70°C and exceptional cooperation ratio with PVA and TBPU (4.0wt%, 3.0wt%), which are 1.649 times, 1.966 times, and 2.652 times than those of untreated papers (65 Nm/g, 6 m N • m2/g, 1701 s). Furthermore, sizing liquid can be conveniently applied and recycled due to their excellent environmental friendliness and Biodegradability, this work provides a promising solution for optimizing surface sizing technology.

Study On Influences Of Beating Process And Surface Sizing On Properties Of Released Base Paper With High Strength And Oil-Resistant Characteristics

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Study on Rheological Characteristic Applied in the Process of Hot-pressing for Particleboard

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Polyvinyl alcohol-waterborne blocked-based polyurethane composite surface sizing agents for enhancing mechanical performance of specialty paper

Comparison of the internal functionalization and surface modification methods of chemi-mechanical pulp handsheets using nanocellulose, chitosan, and DTPA

Influence of density and chemical additives on paper mechanical properties

Influences of Drying Conditions on Sizing Performance of Recycled OCC Fibers

Effect of beating degree of fiber on the development of porosity in polyacrylonitrile-based activated carbon fiber paper

Study on the enhancement of paper tensile strength and hydrophobicity by adding PEI-KH560 in pulp suspension

Exploration on the regulation of writing performance through Pickering emulsions-coated handmade Xuan paper

Enhancing the strength of tissue paper through pulp fractionation and stratified forming

Optimization of the Green Fibre Paper Film Preparation Process Based on Box–Behnken Response Surface Methodology

Study on the Suitability of Bamboo Fiber for Manufacturing Insulating Presspaper

Mechanisms of strength and stiffness improvement of paper after PFI refining with a focus on the effect of fines

Cellulose nanofibers/polyvinyl alcohol blends as an efficient coating to improve the hydrophobic and oleophobic properties of paper

Effect of pulp refining on mechanical and electrical properties of insulating presspaper

Effect of pore structure on mechanical and tribological properties of paper-based friction materials