Abstract:Hot pressing process is an important process in the preparation of bamboo scrimber. However, due to the low thermal conductivity of fiberized bamboo veneer and the low heat transfer efficiency in the preparation of bamboo scrimber, the processing time is prolonged. At the same time, due to the influence of moisture content in the hot pressing process, the "boiler effect" of the core layer with a sharp increase in temperature and excessive steam pressure will appear, resulting in the risk of board explosion. In this study, a pavement method with gradient moisture content is explored, which can make the surface water vaporize and produce steam impact on the core layer, thus improving the heat transfer efficiency of the core layer and reducing the hot pressing period. The results show that when paving with gradient moisture content, the heating rate of the core layer is increased to a certain extent due to the promotion of steam impact on the core layer temperature. At the same time, due to the low moisture content of the core layer, the saturated steam cannot be formed from the moisture to the core layer, so the obvious "boiler effect" will not appear in the core layer, which can improve the hot pressing efficiency and reduce the risk of board explosion. In addition, this method does not reduce the mechanical properties of the panel. Meanwhile, this study introduces a straightforward gradient moisture content paving method and has made structural enhancements to the hot press machine, enabling the practical implementation of gradient moisture content paving.

Study on Rheological Characteristic Applied in the Process of Hot-pressing for Particleboard

Mechanical Properties of Particleboard Based on Zein Adhesive

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Effects of the type of lactic acid bacteria, hot-pressing temperature, and moisture content of fermented bamboo residue on the properties of self-bonding common particleboards

Experimental investigation for vibration reduction of surface-textured journal bearings

The Influence of Mold Pressing Parameters on Electrical Resistance of HDPD/CB Composites

Research on Optimization of the Hot Embossing Process

Influence of gradient moisture content on hot pressing heat transfer of bamboo scrimber and it's mathematical model

Lignin Inter-Diffusion Underlying Improved Mechanical Performance of Hot-Pressed Paper Webs

Effect of Hot-Pressing Temperature on the Properties of Eco-Friendly Fiberboard Panels Bonded with Hydrolysis Lignin and Phenol–Formaldehyde Resin

Effect of Hot-Pressing Process on Mechanical Properties of UHMWPE Fiber Non-Woven Fabrics

Heat Transfer Efficiency and pMDI Curing Behavior during Hot-Pressing Process of Tea Oil Camellia (Camellia Oleifera Abel.) Shell Particleboard

Production of Biodegradable Board Using Rape Straw and Analysis of Mechanical Properties

Preparation of Hot-Pressed Wheat Straw Board by Self-Adhesive Process: Effects of Raw Material Sizes and Acid/Alkali Pretreatment

Research on the Processing Rheological Behavior of Thermoplastic Polyurethane Elastomer Binders

Biodegradable Composites from Pinewood Sawdust and Polyvinyl Alcohol Adhesives

Rheological Study of Microstructures and Properties for Polymeric Materials

Influence of hot-pressing temperature and density on the physical and mechanical properties of bamboo scrimber

Research on temperature field during the hot pressing process of UHMWPE-based water-lubricated bearing

Process parameter–mechanical property relationships and influence mechanism of advanced CFF/PEEK thermoplastic composites