Abstract:Studies on the relationship between resistivity and dynamic rheological properties of carbon black-filled high-density polyethylene (CB/HDPE) composites were carried out. Change of resistivity rho is associated with the dynamic modulus before the positive temperature coefficient/negative temperature coefficient (PTC/NTC) temperature. When the temperature approaches the melting point of HDPE, rho increases rapidly with a decreasing modulus, corresponding to PTC transition. The resistivity-dynamic viscoelasticity relationship in the PTC region can be divided into two parts in which the changes of rho with storage modulus G' and loss modulus G" can be described by the scaling laws given by the critical storage modulus and loss modulus G' (c), and G" (c); adjustable parameters rho'(1c), rho'(2c), rho"(1c) and rho"(2c); and nonlinear exponents n and m, respectively. The accordance between the experimental data and the scaling functions of the dimensionless quantities (G'/G'(c) - 1) and (G"/G"(c) - 1) in the PTC transition region suggests that the rho jump may be the result of a modulus-induced percolation. G'(c) and G"(c) increase, but the four scaling resistivitis, rho'(1c), rho'(2c), rho"(1c), and rho"(2c), decrease with increasing CB concentration, implying that the microstructure change of the composites is the determinant factor for the PTC behavior and the resistivity-dynamic modulus relationship. However, rho'(2c) and rho"(2c) exhibit no scaling dependence. It is suggested that a threshold concentration exists for the modulus of the composites on the basis of examining the plot of both G'(c) and G"(c) against CB concentration. The scaling laws G' similar to Phi(x) and G" similar to Phi(y) hold for the concentration dependence of the critical modulus when Phi > Phi(c) and the estimated values of x and y are 1.10 +/- 0. 10 and 0.89 +/- 0.29, respectively. The resistivity-dynamic modulus can shift to form a master curve. The horizontal factors a(G') and a(G") and the vertical factors a' and a" are relevant to the concentration dependence of the dynamic modulus or PTC behavior. It is believed that the former would be involved in changing the mechanical microstructure formed by the complicated interaction of CB particle and polymer segments, and the latter would be involved in the overall changes of conducting a network during the PTC transition region. (C) 2003 Wiley Periodicals, Inc.

The Influence of Mold Pressing Parameters on Electrical Resistance of HDPD/CB Composites

The Influence of Mold Pressing Parameters on Ptc of Hdpe/Cb Composites

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

Effects of Carbon Black Content on Microwave Absorbing and Mechanical Properties of Linear Low Density Polyethylene/Ethylene-Octene Copolymer/Calcium Carbonate Composites

Temperature Dependence of Electrical Resistivity for Carbon Black Filled Ultra-High Molecular Weight Polyethylene Composites Prepared by Hot Compaction

The electric self-heating behavior of carbon black loaded high density polyethylene composites

Influence of Annealing on Rheological and Conductive Behaviors of High-Density Polyethylene/carbon Black Composites

Effect of Uniaxial Pressures on the Resistance of High Density Polyethylene/Carbon Black Composites

Positive temperature coefficient characteristic and structure of graphite nanofibers reinforced high density polyethylene/carbon black nanocomposites

High-Density Polyethylene/Carbon Black Conductive Composites. I. Effect of Cb Surface Modification on Its Resistivity-Temperature Behavior

Resistance-mechanical Effect of Polymer-Matrix Conducting Composites

Study on the effect of the molding process and service temperature on the mechanical properties and low‐velocity impact performance of the ultra‐high molecular weight polyethylene fiber laminates

Room Temperature Resistance Relaxation Behavior for Carbon Black Filled Conductive Polymer Composites

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

Influence of Irradiation Conditions on the Electrical Behavior of Polyethylene-Carbon Black Conductive Composites

Study on Time-Dependent Resistance of Carbon Black-Loaded High-Density Polyethylene Composites During the Isothermal Course

Effects of Thermoforming Parameters on Woven Carbon Fiber Thermoplastic Composites

Developement of Melt Agglomerate Structure in Conductive Polymer Composites Filled with Carbon Black

Relationship Between the Positive Temperature Coefficient of Resistivity and Dynamic Rheological Behavior for Carbon Black‐filled High‐density Polyethylene

Hot pressing process ameliorates internal defects of PBZ/PVDF composite film for a high electrocaloric effect near room temperature

Morphology and electro-thermal characteristics of polyethylene self-limited temperature heating composite