Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Effect of pore structure on mechanical and tribological properties of paper-based friction materials

Effect of pore structure on the thermophysical and frictional properties of high-density graphite

Friction-Wear Characteristics of Carbon Fiber Reinforced Paper-Based Friction Materials under Different Working Conditions

INFLUENCE OF CONTENTS OF FIBER AND RESIN, AND POROSITY OF PAPER-BASED FRICTION MATERIALS ON THE COMPRESSIVE AND RESILIENT PROPERTIES

Study on Medium Effect on Compression-Resilience of Paper-Based Friction Materials

Effect of Oxygen and Moisture on the Friction and Wear of Carbon Fiber-Reinforced Polymers

Effects of sisal fiber and fly ash on the mechanical and tribological performances of brake friction composites

Effects of a hierarchical pore structure on the tribological properties of an oil-containing iron-based composite

Tribological properties of graphene oxide reinforced aramid paper-based composites

A Study on the Mechanical and Tribological Properties of Carbon Fabric/PTFE Composites

Combined effect of interfacial modification and α-ZrP reinforcement on the tribological properties of PPS fabric/phenolic composites

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Geometry Effect of Different PTFE Fillers on Self-Lubricating PF Composites: Mechanical and Tribological Properties

Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions

Temperature effect on mechanical strength and frictional properties of polytetrafluoroethylene‐based core‐shell nanocomposites

Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites

A new kind of resin-based wet friction material: Non-woven fabrics with isotropic fiber networks as preforms

Synergistic Effect of Microconvex Texture and Particle Medium on the Tribological Property of the Rubber Sliding Interface

Organic Brake Friction Composite Materials: Impact of Mixing Duration on Microstructure, Properties, Tribological Behavior and Wear Resistance

Towards optimized pore structure to balance the thermal-mechanical performance of foamed ceramic

Preparation of CF/PEEK and Study on Friction Performance