Abstract:This study was to investigate the nanomechanical and nanotribological properties of polyether ether ketone (PEEK)-based composites for biomedical applications and to gain a fundamental understanding of the effects of carbon fibers in carbon-fiber-reinforced PEEK (CFRPEEK) on the mechanical properties and wear performance in a microscale. Nanoindentation tests with a Berkovich indenter and nanoscratch experiments with a diamond stylus were performed on PEEK and CFRPEEK samples. The nanowear features and mechanisms of the tested samples were analyzed using 3D white-light interfering profilometry and scanning electron microscopy (SEM). The obtained results indicated that the reinforced carbon fibers increased the nanohardness and elastic modulus and decreased the friction coefficient and wear rate of PEEK. Different to many existing studies where a constant load was used in a nanoscratch test and the normal load was a key factor influencing the scratch performances of the tested specimens, stick-slip phenomena were observed on both PEEK and CFRPEEK in the nanoscratch tests with load increasing progressively. In constant load conditions, it was found that the major nanowear mechanisms of PEEK are adhesion, abrasion, and plastic deformation, while the nanowear mechanisms of CFRPEEK are dominated by severe adhesive wear, abrasive wear and mild fatigue. CFRPEEK has demonstrated superior nanomechanical and nanotribological performances, and hence can be considered a potential candidate for biomedical applications.

Preparation of CF/PEEK and Study on Friction Performance

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

Study of Friction and Wear Characteristics of PEEK by Reciprocating Sliding Experiment and Temperature Dependences Simulation

A Study on the Mechanical and Tribological Properties of Carbon Fabric/PTFE Composites

Comparison of Friction and Wear Performances of Pure Poly-ether-ether-ketone Polymer and Carbon Fiber Reinforced Poly-ether-ether-ketone Polymer Composite for Bushing and Bearing Applications

An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing

The Research of Polyetheretherketone Based Composite Coatings

FRICTION AND WEAR PROPERTIES OF PPESK COMPOSITES

Fretting Wear Study of PEEK-Based Composites for Bio-implant Application

Study On The Nanomechanical And Nanotribological Behaviors Of Peek And Cfrpeek For Biomedical Applications

Effect of CaCO_3 Whisker and PTFE on Dry Friction Behavior of PEEK

Testing and Analysis of Frictional Performance of Carbon Fiber/Metal Composite Materials

Tribological Properties of PEEK and Its Composite Material under Oil Lubrication

Molecular Dynamics Simulation and Experimental Study of the Mechanical and Tribological Properties of GNS-COOH/PEEK/PTFE Composites

Experimental and numerical investigations of wear behaviors of short-carbon-fiber reinforced polyetherimide composite

Study on the Friction and Sliding Wear Behavior of Hybrid Polytetrafluoroethylene/Kevlar Fabric Composites Filled with Polyphenylene Sulfide

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

Grinding performance study of CF/epoxy and CF/PEEK composites

Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes