Abstract:Grinding performance investigation of multidirectional CF/PEEK composites—A comparative with unidirectional CF/PEEK. To distinguish the grinding performance of the multidirectional (MD) and unidirectional (UD) carbon fiber‐reinforced thermoplastic (CFRTP) composites, MD and UD carbon fiber‐reinforced poly‐etherether‐ketone (CF/PEEK) composites were employed in this study. Different ply stacking sequences and process parameters were set for grinding experiments. Subsequently, the surface morphologies and roughness were observed and measured. Experimental results indicated that the variations of grinding forces with grinding parameters of MD‐CF/PEEK and UD‐CF/PEEK were consistent. However, the heat transfer mechanism and the effects of grinding parameters on the maximum grinding temperatures were different between the two composites. The grinding forces and temperatures of MD‐CF/PEEK were slightly lower than UD‐CF/PEEK, and MD‐CF/PEEK reached better surface quality under the same parameters, indicating that the grinding performance of MD‐CF/PEEK was not the simple superposition of UD‐CF/PEEK. In addition, the chip formation and material removal mechanism of CF/PEEK were investigated. The grinding performance of MD‐CF/PEEK was primarily dependent on the θ elements of laminate while the grinding performance of UD‐CF/PEEK was closely related to the fiber orientation angles during grinding. This study established a more in‐depth understanding into the grinding performance of MD‐CF/PEEK and provided technical guidance for high‐quality grinding of CFRTP. Highlights The grinding performance of the multidirectional (MD) and unidirectional (UD) carbon fiber‐reinforced poly‐etherether‐ketone (CF/PEEK) is compared. The grinding forces and temperatures of MD‐CF/PEEK are slightly lower than that of UD‐CF/PEEK, and the MD‐CF/PEEK reach a better surface quality under the same grinding parameters. The grinding performance of MD‐CF/PEEK is primarily dependent on the θ elements of laminate, and the change of layering order is not a critical factor. The grinding performance of UD‐CF/PEEK is closely related to the fiber orientation angles during the grinding process. The surface quality of MD‐CFRTP can be effectively improved by reducing the grinding depth and feed speed, and increasing the grinding wheel speed.

Grinding performance study of CF/epoxy and CF/PEEK composites

Grinding performance investigation of multidirectional CF/PEEK composites—A comparative with unidirectional CF/PEEK

Investigation on grinding temperature characteristics of CF/PEEK and material removal mechanism under temperature treatments

Effects of grinding mode on grinding performance of anisotropic CF/PEEK composites

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Investigations on Grinding Process of Woven Ceramic Matrix Composite Based on Reinforced Fiber Orientations

Research of the Grinding Force and Surface Morphology of Fiber-Reinforced Ceramic Matrix Composite

Effect of Fiber Type and Content on Surface Quality and Removal Mechanism of Fiber-Reinforced Polyetheretherketone in Ultra-Precision Grinding

Thermal Influence on Surface Layer of Carbon Fiber Reinforced Plastic (CFRP) in Grinding

Preparation of CF/PEEK and Study on Friction Performance

Study on removal mechanism and surface quality of grinding carbon fiber toughened ceramic matrix composite

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Some observations in grinding surface quality of FRCMC

Effect of Grinding Parameters on Industrial Robot Grinding of CFRP and Defect Formation Mechanism

Grindability of carbon fiber reinforced polymer using CNT biological lubricant

Effects of Abrasive Types on Grinding of Chopped Strand Mat Glass Fiber-Reinforced Polymer Composite Laminates

Numerical and experimental investigation of orthogonal cutting of carbon fiber-reinforced polyetheretherketone (CF/PEEK)

Grindability and surface quality of SiCp/Al composites with resin bond and electroplated wheels

Effect of fiber orientation on material removal mechanisms in the machining of 3D Cf/SiC composite with a brazed diamond grinding rod: Experiment and simulation

Application of a Cryogenic Cooling System on the Grinding Operation of Polyether Ether Ketone Biomaterial (PEEK)

Influence of the fiber orientation on 3D C/C–SiC composite material and its formation mechanism of the machining surface