Abstract:The structural differences at various positions in the GH3625 alloy before and after magnesium treatment were statistically analyzed. In situ observation experiments were conducted at different cooling rates to examine the changes in solidification structure following magnesium treatment. A new theoretical explanation for the differential effects of magnesium treatment was proposed based on classical homogeneous nucleation theory. In practical applications, intermetallic compounds like Laves phase and metal carbides adversely affect the performance of nickel‐based superalloys. Using a high‐temperature confocal laser scanning microscope, the solidification process of as‐cast GH3625 alloy containing Mg at different cooling rates (−20, −35, and −50 °C min−1) is studied. Fitting curves of the volume fraction of the solid phase with solidification temperature before and after Mg treatment are obtained. Trends of solid phase transformation rates with solidification temperature are determined. Differential scanning calorimetry is employed to analyze and statistically evaluate the melting temperature range and enthalpy of each phase during the melting process. Experimental results demonstrate that Mg treatment significantly accelerates the alloy solidification at the cooling rates of −20 and −35 °C min−1, while reducing the area of residual liquid phase at the same solidification temperature, disrupting the Laves/NbC eutectic relationship, and regularizing NbC morphology, transitioning its distribution from aggregation to dispersion. After Mg treatment, the precipitation of the Laves phase is significantly reduced. As a result, the influence mechanism of Mg treatment on the phase transformation and microstructure of GH3625 is clarified based on homogeneous nucleation theory.

Phase-Field Simulation on the Influence of Cooling Rate on the Solidification Microstructure of Mg-Gd-Y Ternary Magnesium Alloy

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

The Effect of Cooling Rate on the Microstructure and Mechanical Properties of Mg–Zn–Gd-based Alloys

Numerical Simulation of Recalescence of 3-Dimensional Isothermal Solidification for Binary Alloy Using Phase-Field Approach

Experimental Study and Cellular Automaton Simulation on Solidification Microstructure of Mg–Gd–Y–Zr Alloy

Phase-Field Model of Isothermal Solidification of Binary Alloy with Multiple Grains

Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Simulation on Microstructure Evolution and Mechanical Properties of Mg−Y Alloys: Effect of Trace Y

Experimental Study on the Effect of Cooling Rate on the Secondary Phase in As‐Cast Mg–Gd–Y–Zr Alloy

Simulation of Isothermal Solidification of Ternary Alloy with Phase-Field Model

In Situ Observation of Microstructure and Precipitate Phase Transformation during the Solidification of Mg‐Containing GH3625 Alloy at Different Cooling Rates

Microstructures simulation of magnesium-based alloys during solidification by phase-field method

Characterization on the Three-Dimensional Morphology and Microstructure of Eutectics in As-Cast Mg-Gd-Y-Zr Alloys by Using X-ray Tomography Technique

Effect of cooling rate on microstructure and mechanical properties of Mg-9Gd-4Y-1Zn-1Al alloy

Three Dimensional Numerical Simulation of Solidification Microstructure of Single Phase Alloy

Unveiling precipitation behavior in Mg-Y based alloys

Numerical Investigation on Precipitation Hardening of Mg-Gd Alloys

Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy

Complex hexagonal close-packed dendritic growth during alloy solidification by graphics processing unit-accelerated three-dimensional phase-field simulations: demo for Mg–Gd alloy