Abstract:Plastic injection molding is widely used in many industrial applications. Plastic products are mostly used as disposable parts or as portable parts for fast replacements in many devices and machines. However, mass production is always adopted as an ideal method to cover the huge demands and customers’ needs. The problems of warpage due to thermal stresses, non-uniform pressure distribution around cavities, shrinkage, sticking and overall products quality are some of the important challenges. The main objective of this work is to analyze the stress distribution around the cavities during the molding and demolding to avoid their effects on the product quality. Moreover, diagnosing the critical pressure points around and overall the cavity projection area, which is subjected to high pressure will help to determine the optimum pressure distribution and ensure filling all cavities at the same time, which is another significant objective. Computer-aided design (CAD) and CATIA V5R20 are adopted for design and modeling procedures. The computer-aided engineering (CAE) commercial software ABAQUS 6141 has been dedicated as finite element simulation packages for the analysis of this process. Simulation results show that stress distribution over the cavities depends on both pressure and temperature gradient over the contact surfaces and can be considered as the main affecting factor. The acceptable ranges of the cavity stresses were determined according to the following values: the cavity and core region temperature of 55–65 °C, filling time of 10–20 s, ejection pressure 0.85 % of injection pressure, and holding time of 10–15 s. Also, theoretical results reveal that the uniform pressure and temperature distribution can be controlled by adjusting the cavities layout, runner, and gate size. Moreover, the simulation process shows that it is possible to facilitate and identify many difficulties during the process and modify the prototype to evaluate the overall manufacturability before further investing in tooling. Furthermore, it is also concluded that tooling iterations will be minimized according to the design of the selected process

Filling Processing Simulation Of The Injection Mold For The Narrow And Wraparound Plastic With Embedded Part

Numerical simulation of filling flow of polymer melt in injection molding

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Effect on Residual Wall Thickness of Parts with Floating Core Injection of Water-Assisted Injection Molding

Cavity Filling Analysis of Injection Molding Simulation:The Formation of Bubble and Weld Line

Research on the Application of Injection Molding Simulation Technology in Mold Design

Study of injection molding process simulation and mold design of automotive back door panel

INTEGRATED SIMULATION OF MELT FLOW, FIBER FRACTURE AND FIBER ORIENTATION FOR FIBER REINFORCED PLASTICS IN INJECTION MOLDING

3D Simulation of Filling Stage of Plastic Injection Molding Based on Improved Finite Volume Method

Research on Lightweight Injection Molding (CAE) and Numerical Simulation Calculate of New Energy Vehicle

Application of CAE for mold flow analysis in plastic molding mold design

Analysis of the main factors affecting mass production in the plastic molding process by using the finite element method

Visual Computer-based Simulation of Sandwich Injection Molding Process:Influence of Shape of Rectangle Goods and Injection Gate Location on Breakthrough Phenomenon of Core Melt

Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding

A novel and simple method to improve thermal imbalance and sink mark of gate region in injection molding

Design of Cooling System for Narrow Area of Automotive Injection Mold Based on Computer Technology

Process Simulation-Based Design, Mold Construction and Mechanical Performance Evaluation of an Insert-Injection Molded Thermoplastic Polyurethane Part

Plastic Injection Mold Processing

Optimization of the Compression (Injection/Compression) Molding Process Using Numerical Simulation

Three-dimensional transient finite element cooling simulation for injection molding tools

Numerical Simulation of Mold Filling of Polymeric Materials with Friction Effect during Hot Embossing Process at Micro Scale