Abstract:Single event effect occurs when a single energetic particle penetrates sensitive nodes and deposits enough charge by ionization in semiconductor devices. It has become a major reliability concern for spaceflight. Single event effect characteristics analysis methods based on simulation are presented for typical circuit elements in spacecraft power systems. The failure mechanism and impact factors of single event burnout in trench power MOSFETs are investigated through numerical simulation. The broadening, quenching and capture of single event transients in combinational logics are analyzed by circuit simulation based on a coupled single event transient injection method. A behavioral modeling is introduced to predict single event effect sensitivity of the parallel to serial conversion circuit. The results show that ion-induced holes can spread efficiently to turn on the parasitic bipolar junction transistor and result in stronger carrier multiplication when the ion strikes at the center of the gate region in trench power MOSFETs. Increasing the depth of P+ plugs, decreasing the doping concentration of source regions and using lower drain bias voltages can mitigate single event burnout susceptibility. Using the same load capacitance for each stage inverter and selecting a suitable gate-width ratio are recommended to prevent single event transient broadening in inverter chains. Moreover, the reset pin of D flip-flops in the parallel to serial conversion circuit should be hardened by design according to the behavioral modeling results.

Study on the Non-random Characteristic of PETT Oscillation

Electromagnetic Disturbance Characteristics and Influence Factors of PETT Oscillation in High-Voltage IGBT Devices

Sensitivity Analysis and Suppression Method on PETT Oscillations under Short Circuit Condition of High-Power IGBT Modules

Analytical Modeling and Sensitivity Analysis on Plasma Extraction Transit Time (PETT) Oscillations in High-Voltage NPT P-I-n Diode

Transient Electrothermal Analysis of Interconnects in the Presence of a ESD pulse

The Analysis and Experimental Investigation of Electromagnetic Characteristics on High Speed Circuit PDN with Multislots

Analysis of Power Electronic Traction Transformer under Non-Single Frequency PWM Control

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

A Coupled 3D FEM-Distribute Circuit Model for Numerical Analysis of Small Time Scale Transients of an IGBT based Inverter

The Influence of Parasitic Parameters of Power Modules on CM Current During Switching Oscillation

Cascaded H-bridge Type Power Electronic Transformer Electromagnetic Interference Study Based on Parallel Simulation

Study on the Effects of Burst Pulse Magnetic Field Interference in IGBT Switching Circuit for High Power Application

Characteristics and Identification of Partial Discharge for Insulation Structures in High Voltage IGBT Modules Under Positive Square Wave Voltage

Influence of High-Power Near-Field Modulation Pulse Interference on IGBT Inverter Circuit

Dynamic Switching Characteristics Test Platform Design and Parasitic Parameter Extraction of Press-Pack IGBT Modules

SINGLE EVENT EFFECT CHARACTERISTICS ANALYSIS OF TYPICAL CIRCUIT ELEMENTS IN SPACECRAFT POWER SYSTEMS

Power characteristics of isolation units in a novel power electronic transformer (PET) for locomotive traction applications

Frequency Characteristics Analysis of Transient Earth Voltages Aroused by Partial Discharge in Switchgears

Open-Circuit Fault Characteristics and Location Methods of Switch Elements For Cascaded Power Electronic Transformers

Study on the Effect of Test Condition on Thermal Resistance of the Press-Pack IGBT Module

Interaction Characteristics of Ports of PET in AC/DC Hybrid System under Large Disturbances