Abstract:Continuous structural health monitoring of long-span bridges, such as suspension bridges, is essential for ensuring stability, and various efforts have been undertaken towards this goal. The hanger cables of suspension bridges play a crucial role in transmitting the main loads within the cable support structure. Therefore, monitoring the tension of hanger cables is vital for maintaining structural stability. Traditionally, the vibration method has been utilized for operational suspension bridges to indirectly estimate the tension of suspension bridge hanger cables. This method involves measuring the natural frequencies for vibration modes from the cables and their geometric conditions. In this study, digital camcorders and tripods were employed to measure the hanger cable response conveniently and efficiently. The response measured by digital camcorders is displacement based, posing challenges in measuring the natural frequencies for high-order modes required by the vibration method. Typically, systems for measuring structural response incorporate white noise components across all frequency domains, complicating the identification of cable frequency component characteristics when the response frequency measured by a digital camcorder is lower than the white noise frequency. Furthermore, measurements taken with a digital camcorder may suffer from low resolution due to long distances and optical limitations, hindering the measurement of high-frequency response components. To address these challenges, this study introduced a back analysis method to estimate tension using the natural frequencies of low-order modes. The method defines the difference between measured natural frequencies and those predicted by finite-element analysis as the error function. Optimization was then conducted using the univariate search method to minimize this error function. The findings suggest that the tension estimated by applying only the first natural frequency of hanger cables through the back analysis method closely aligns with estimates obtained using the vibration method. This research highlights the potential of using standard digital camcorders as an accurate and cost-effective means for estimating hanger cable tension.

Genetic Algorithm-based Tension Identification of Hanger by Solving Inverse Eigenvalue Problem

An Identification Method For Short Hanger Tension Of Arch Bridges

Estimation of Tension Force in Short Hangers Using Added Mass Method

A Method for Identification of Short Hanger Tension Considering Damper

Identification method for tensile force in hanger of arch bridges with damper and its application

The Tension Identification of Short Hangers Based on Neural Network Algorithm and Additional Mass Method

Identification of Flexural Rigidity and Tension of Short Hangers with Adding Mass and Neural Network

Identification method of vehicle parameters based on genetic algorithms

TENSION MEASUREMENT FORMULA OF FLEXIBLE HANGER RODS IN TIED-RODS ARCH BRIDGES BASED ON VIBRATION SHAPE FUNCTION OF DEFLECTION CURVE

Automatic identification of fundamental frequency for tied arch bridge suspender tension monitoring

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Damage Detection of Hangers in Arch Bridges Based on Relative Variation of Wavelet Total Energy

Test on Forces in Flexible Hanger Rods in Combinatorial Bridges with Beams and Arches

A numerical application of Bayesian optimization to the condition assessment of bridge hangers

Static Deflection Difference-Based Damage Identification of Hanger in Arch Bridges

Vortex-Induced Vibration Characteristics and Equivalent Static Force Calculation Method of Circular Steel Hangers on Arch Bridge

Identification of hanger damage based on deflection influence matrix

Damage Identification in Hangers of Through-Arch Bridges Using Static Deflection Difference at the Anchorage Point

Dynamic Analysis of the Hangers in High-Speed Railway Arch Bridge Based on Train–Bridge Interaction Simulation and Field Measurement

Back analysis using the univariate search method for estimating hanger cable tension

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge