Abstract:<p>Cables and hangers are critical components of long‐span bridges, tension forces of them are needed to be accurately measured for ensuring the safety of bridges. Traditionally, cable tension forces are measured by attached accelerometers or elastomagnetic (EM) sensors, however, applying these sensors into engineering practice are time‐consuming, labor‐intensive, and highly dangerous. To address these problems, an unmanned aerial vehicle (UAV)‐based noncontact cable force estimation method with computer vision technologies was proposed in this article. Basic concept of the proposed method is to use the UAV‐installed camera for capturing vibration images of cables from a certain distance and cable dynamic properties are extracted by analyzing captured images. It includes two aspects: (a) a line segments detector (LSD) was employed for detecting cable edges from captured video and a line matching algorithm was further proposed for extracting dynamic displacements; (b) the frequency difference of adjacent higher modal frequencies identified from relative displacements of the cable was employed for cable force calculation to avoid the difficulty of extracting fundamental frequency from UAV‐captured video. It should be noted that relative displacement herein refers to the difference between displacements of two points on the same cable. Advantages of the proposed method lie in that the proposed LSD and matching algorithm are more robust than traditional correlation‐based algorithm for calculating dynamic displacements of bridge cables and it does not need to adjust predefined parameters (i.e., subset size in correlation‐based algorithms). In addition, the combination of relative displacement and frequency difference‐based cable force estimation has the capability of enhancing the Fourier spectrum magnitude of bridge cables and reducing the effect of UAV motion on extraction of cable vibration frequencies. The effectiveness and robustness of the proposed method was verified by using an experimental inclined cable and field‐testing data of a long‐span suspension bridge. Results show that calculated cable forces with UAV technology have a good agreement with reference values measured by attached accelerometers and fixed camera, demonstrating correctness and robustness of the proposed method for cable force estimation.</p>

Back analysis using the univariate search method for estimating hanger cable tension

Estimation of Tension Force in Short Hangers Using Added Mass Method

An Identification Method For Short Hanger Tension Of Arch Bridges

A Method for Identification of Short Hanger Tension Considering Damper

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Computer vision‐based real‐time cable tension estimation algorithm using complexity pursuit from video and its application in Fred‐Hartman cable‐stayed bridge

A Real-Time Monitoring System for Cable Tension with Vibration Signals Based on an Automated Algorithm to Sieve Out Reliable Modal Frequencies

Noncontact cable force estimation with unmanned aerial vehicle and computer vision

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge

Identification of Time-Varying Cable Tension Forces Based on Adaptive Sparse Time-Frequency Analysis of Cable Vibrations

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Fast Operational Modal Analysis of a Single-Tower Cable-Stayed Bridge by a Bayesian Method

Long-Term In-Service Monitoring and Performance Assessment of the Main Cables of Long-Span Suspension Bridges

Measuring Methods of Cable Tension in Cable-Stayed Bridges

Computer vision‐based real‐time cable tension estimation in Dubrovnik cable‐stayed bridge using moving handheld video camera

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Development of a Low-Cost Automated Tension Estimation System for Cable-Stayed Bridges

Research on Stay Cable Tension Estimation Based on Vision-Based Monitoring System