Abstract:Carbon coated LiFePO4 (LiFePO4/C) with different contents of high electron conductive iron phosphide phase was synthesized by an aqueous sol–gel method in a reductive sintering atmosphere. Different synthesis parameters were used for adjusting the microstructure and phase compositions of the products. The effects of the carbon coating and iron phosphides on the electrochemical properties of the LiFePO4/C electrodes were studied by means of testing the discharge capacities at rates of 0.1–5C (1C=170mAhg−1) and analyzing the CV curves. The results show that carbon coating in a content of 1.5wt.% derived from the carbon source of ethylene glycol greatly decreases the particle size of LiFePO4 in one order in the specific surface area, and significantly improves the rate capability of LiFePO4. The effect of the content of FeP on the capacity of the carbon coated LiFePO4 was different at different discharge rates. Increasing the content of FeP from 1.2 to 3.7wt.% slightly decreases the capacity of LiFePO4/C at low discharge rate (0.1C and 1C), but obviously increases the capacity of LiFePO4/C when the discharge rate is increased to 5C. For the carbon free sample, even it also has 1.8wt.% FeP, it still possesses poor capacity due to the large particle size of LiFePO4 and the lack of conductivity. And too much iron phosphides lowers the discharge capacity of the electrode since they are inert for the deinsertion/insertion of lithium ion.

Structure And Electrochemical Properties Of Lifepo(4)/C With Different Disordered/Graphitized Carbon

Effect of the Structure of Pyrolytic Carbon on the Performance of LiFePO4/C Composite Cathode Material

Electrochemical property of LiFePO4/C composite cathode with different carbon sources

Effects of pyran-ring structure in carbon sources on the electrochemical performance of liFePO4/C

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Preparation and Electrochemical Properties of High-performance LiFePO_4

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Structural and Electrochemical Characterization of 0.7lifepo4·0.3li3v2(po4)3/c Cathode Materials Using PEG and Glucose As Carbon Sources

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Impact of carbon structure and morphology on the electrochemical performance of LiFePO 4 /C composites

Effects of carbon coating and iron phosphides on the electrochemical properties of LiFePO4/C

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction

Electrochemical Performance and Stability of LiMn0.6Fe0.4PO4/C Composite

Fabrication and electrochemical properties of LiFePO4/C cathode materials

Synthesis, characterization, and electrochemical performance of LiFePO4/C cathode materials for lithium ion batteries using various carbon sources: best results by using polystyrene nano-spheres

Structure Optimization and the Structural Factors for the Discharge Rate Performance of LiFePO4/C Cathode Materials

Preparation, Characterization and Electrochemical Properties of Mesoporous LiFe0.99Mo0.01PO4/C

Synthesis and Electrochemical Performance of LiFePO4/C Prepared by a New Method

Optimized Performances of Core–shell Structured LiFePO4/C Nanocomposite