Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

Design of a Flexible Drive Circuit for Piezoelectric Actuators

A dual-stage low-power converter driving for piezoelectric actuator applied in micro robot

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Piezoelectric Actuators and Motors: Materials, Designs, and Applications

A Novel and Cost-Effective Drive Circuit for Supplying a Piezoelectric Ceramic Actuator with Power-Factor-Correction and Soft-Switching Features

Design and Experimental Research of a New Type of Piezoelectric Rotary Actuator

Micro converter with a high step-up ratio to drive a piezoelectric bimorph actuator applied in mobile robots

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators

High Efficiency Driving of Linear Motor Based on Piezoelectric Actuator

Design Optimization of a Dual Function Piezoelectric Actuator

Design and Testing of Piezoelectric Circular Arc Driver

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Design, analysis and experiments of a linear piezoelectric actuator adopting a flexible mechanism with wing skeletal structure

Design and Experiments of a Miniature Piezoelectric Actuator Using a Multilayer PZT Bimorph

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

A novel high energy density single-phase linear piezoelectric motor: design and experiment

A novel three-phase excitation piezoelectric motor for macro-micro actuation: Integration design, systematic modeling, and experimental evaluation

An Input-Current Shaping and Soft-Switching Drive Circuit Applied to a Piezoelectric Ceramic Actuator

Piezoelectric Micro Driving Mechanism Design and Experiment

The Design and Research on a New Piezoelectric Torsion Actuator