Abstract:To achieve higher output performance in precision applications, and in order to gain deeper insight into operation principle, a dynamic model is established including the transmission relationship between the stators, the driving shaft, and the mover based on a slip-slip type inertial linear piezoelectric actuator with double stators. The influence of stator material and symmetry ratio of the excitation signal on the vibration characteristics of the stator and the output performance are investigated. This study reveals the relationship between these factors through a combination of simulations and experiments. Prototypes using several materials are machined and assembled, and the vibration characteristics and output performance are rigorously tested. The results obtained from the experimental measurements are consistent with the simulation results, confirming the validity and rationality of the dynamic model. The experimental results of the stator, as well as the actuator, are analyzed. It can be concluded that the actuator is able to output a larger effective displacement in one motion period with the increased symmetry ratio of the triangular wave signal, applied with a higher operating frequency, resulting in a higher output velocity of 42 mm/s and a larger load of 300 g with the steel stator, and a higher displacement resolution of 18 nm can be achieved using the AL alloy stator. This research not only provides an effective method for enhancing and selecting the desired output performance for the researched actuator but also can be extended to other slip-slip type inertial linear piezoelectric actuators.

Design Optimization of a Dual Function Piezoelectric Actuator

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Modeling and Optimal Design of the Rotary-Linear Type Two-Degree-of-Freedom Ultrasonic Motors

Multi-parameter optimization of piezoelectric actuators for multi-mode active vibration control of cylindrical shells

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A new hysteresis modeling and optimization for piezoelectric actuators based on asymmetric Prandtl-Ishlinskii model

Design and Experimental Research of a New Type of Piezoelectric Rotary Actuator

Design, simulation, and motion characteristics of a novel impact piezoelectric actuator using double statorsstators

A bio-inspired piezoelectric motor with simple structured asymmetric stator

Development and Analysis of Multi-Degree-of-Freedom Piezoelectric Actuator Based on Elephant Trunk Structure

Topology optimization of piezoelectric actuators using moving morphable void method

Dynamic modelling and mechanical analysis of an inertial linear piezoelectric actuator with double stators

A new optimization framework for piezoelectric actuators location identification

The Design and Research on a New Piezoelectric Torsion Actuator

Actuator Placement Optimization For Piezothermoelectric Biotic Thermal Robust Structure

Optimization research of stator with two degree-of-freedom traveling-wave spherical ultrasonic motor

Feedforward Control For Piezoelectric Actuator Using Inverse Prandtl-Ishlinskii Model And Particle Swarm Optimization

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Modeling and Design Optimization of a New Piezoelectric Inchworm Actuator with Screw Clamping Mechanisms

Improvement on the Structure Design of a Kind of Linear Piezoelectric Motor with Flexible Drive-Foot

Design and Locomotion Study of Two-DOF Actuator Driven by Piezoelectric–Electromagnetic Hybrid Mode