Abstract:Accurate characterisation of small defects remains a challenge in non-destructive testing (NDT). In this paper, a principle-component parametric-manifold mapping approach is applied to single-frequency eddy-current defect characterisation problems for surface breaking defects in a planar half-space. A broad 1-8 MHz frequency-range FE-circuit model & calibration approach is developed & validated to simulate eddy-current scans of surface-breaking notch defects. This model is used to generate parametric defect databases for surface breaking defects in an aluminium planar half-space and defect characterisation of experimental measurements performed. Parametric-manifold mapping was conducted in N-dimensional principle component space, reducing the dimensionality of the characterisation problem. In a study characterising slot depth, the model & characterisation approach is shown to accurately invert the depth with greater accuracy than a simple amplitude inversion method with normalised percentage characterisation errors of 38% and 17% respectively measured at 2.0 MHz across 5 slot depths between 0.26 - 2.15 mm. The approach is used to characterise the depth of a sloped slot demonstrating good accuracy up to ~2.0 mm in depth over a broad range of sub-resonance frequencies, indicating applications in geometric feature inversion. Finally the technique is applied to finite rectangular notch defects of surface extents smaller than the diameter of the inspection coil (sub-aperture) over a range of frequencies. The results highlight the limitations in characterising these defects and indicate how the inherent instabilities in resonance can severely limit characterisation at these frequencies.

Digital Frequency Sweeping Approach For Alternating Current Field Measurement

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Improved Sensitivity for Subsurface Imaging by Contact Resonance Atomic Force Microscopy Using Fano Peaks

Novel phase reversal feature for inspection of cracks using multi-frequency alternating current field measurement technique

On-Site Non-contact Detection of the Cracks in Aeroengine Blades by Alternating Current Field Measurement Technique

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Method of Imaging and Evaluation for Defect Based on Pulsed Eddy Current

Inspection of defects in conductive multi-layered structures by an eddy current scanning technique: Simulation and experiments

Nondestructive Testing System of Alternative Magnetic Leakage Flux based on the Magnetic Field Measurement and the Frequency Sweeping Method

A Novel Frequency-Band-selecting Pulsed Eddy Current Testing Method for the Detection of a Certain Depth Range of Defects

Excitation with Phase Shifted Fields-Enhancing Evaluation of Deep Cracks in Eddy-Current Testing

Exploring high-frequency eddy-current testing for sub-aperture defect characterisation using parametric-manifold mapping

Researches of Flaw Magnetic Field Signal in Alternating Current Field Measurement Technique

Time-domain Approach for Ultrasonic Non-destructive Detection Based on Synthetic Aperture Focusing Technique

In-line inspection technology of oil and gas long-distance pipeline based on alternating current field measurement

Progress in Evaluation of Deep Artificial Defects from Sweep-Frequency Eddy-Current Testing Signals

A Nondestructive Testing Method Based on Electric Field Measurement

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

A Defect Visualization Method Based on ACFM Signals Obtained by a Uniaxial TMR Sensor

Quantitative Evaluation of Deep-Shallow Compound Defects Using Frequency-Band-selecting Pulsed Eddy Current Testing