Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

The Improvement on One‐pot Preparation of CoMo/Al2O3‐TiO2 Catalysts with Citric Acid Post‐treatment for Hydrodesulfurization of Thiophene

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Study on the preparation of TiO2-Al2 O3 composite support and its application in Co-Mo/TiO2-Al2 O3 catalyst for hydro-desulfurization

Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al2O3 and Co-Mo-Ni/TiO2-Al2O3 Catalysts

CoMo/Al2O3 Catalysts Prepared by Tailoring the Surface Properties of Alumina for Highly Selective Hydrodesulfurization of FCC Gasoline

Redispersion Effects of Citric Acid on CoMo/γ-Al2O3 Hydrodesulfurization Catalysts

Synthesis of alumina-nitrogen-doped carbon support for CoMo catalysts in hydrodesulfurization process

Optimizing Both the CoMo/Al2O3 Catalyst and the Technology for Selectivity Enhancement in the Hydrodesulfurization of FCC Gasoline

Enhanced hydrodesulfurization activity of thiophene over hollow tubular CoMo unsupported catalysts

N-octyltrimethylammonium bromide-assisted self-assembly of CoMo precursors to prepare CoMoS/Al 2 O 3 catalysts for highly selective hydrodesulfurization of thiophene

Precise Tuning the CoMoOx/Al2O3 and CoMoSx/Al2O3 Interfacial Structures for Efficient Hydrodesulfurization of Dibenzothiophene

Construction of High Content CoMoS Active Sites Through the Combination of Co 5 Mo 10 Molecular Precursors and Inert Carbon Matrix Support for Deep Hydrodesulfurization

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Improving Both the Activity and Selectivity of CoMo/δ-Al 2 O 3 by Phosphorous Modification for the Hydrodesulfurization of Fluid Catalytic Cracking Naphtha

Tailoring the Structure of Co-Mo/mesoporous Γ-Al2o3 Catalysts by Adding Multi-Hydroxyl Compound: A 3000 Kt/a Industrial-Scale Diesel Ultra-Deep Hydrodesulfurization Study

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Influence of Active Phase Structure of CoMo/Al2O3 Catalyst on the Selectivity of Hydrodesulfurization and Hydrodearomatization

Role of Citric Acid in Preparing Highly Active CoMo/Al2O3 Catalyst: from Aqueous Impregnation Solution to Active Site Formation

Hierarchically Macro-/Mesoporous Structured Co–Mo–Ni/γ-Al2O3 Catalyst for the Hydrodesulfurization of Thiophene