Abstract:The rated capacity of reciprocating compressor tends to be higher than the level needed, so the capacity regulation needs to be implemented to save unnecessary energy waste. Among the methods for reciprocating compressor capacity regulation, holding the suction valves open in partial stroke is a widely used method for its economy, full-range and easy-using characters. The capacity regulation system based on a hydraulic distributor has been successfully applied in industrial process. Hydraulic distributor is the core component of the complete set of stepless capacity regulation system. Continuous high-pressure hydraulic oil provided by hydraulic unit is converted into a pressure impulse wave with a controllable periodic time and pressure acting time when it flows through the hydraulic distributor, which is used to realize the suction valves regulation when it is in the compression stroke. Although the equipment is successfully used in industry fields, the fluid mechanics design of hydraulic distributor is still empirical as its complexity of the fluid field in inner circulation space. For better and more rational distributor design, the flow field in inner zones needs to be better analysed and studied. The manuscript concerned the subjects of path lines, pressure and velocity distribution in hydraulic distributor's flow channels using the CFD software FLUENT. The article explored the flow field characteristics and the flow performance with 5.0 MPa outlet pressure. In the end, a systematic conclusion would be given to guide the actor design.

Research on Oil Chamber Flow in On-load Tap-changer Switching Process with CFD

Study on Oil Flow Surging and Protection Optimization for on Load Tap Changer of Converter Transformer

Mathematical Modeling and Simulation of Flow Field of Switching Process of On-Load Tap Changer for Large Capacity Transformer

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Numerical Simulation of Overpressure Caused by Arcing Faults Within an On-Load Tap Changer

Experimental research on the switching characteristics of on-load tap changers

Experimental Investigation on Electrical and Mechanical Vibration Responses of Diverter Switches Within OLTCs

Performance Analysis Method of an On-Load Tap-Changer Cam Mechanism in Transformer Oil

THE CFD SIMULATION RESEARCH ON HYDRAULIC TRANSFORMER

Research on Gas Protection Misoperation Mechanism and Strategy in Switching Process of On-Load Tap Changer for Large Capacity Transformer

Experimental Study on Discharge of Impurities in Oil of on Load Tap Changer of Converter Transformer

CFD Arc Simulation of a Switching-off Process in a Model Chamber

Vacuum Interrupter Design for On-Load Tap-Changer of Large-capacity Converter Transformer

The simulation of electric field and flow field in load switch for capacitor banks switching

Bidirectional Field–circuit Coupling Analysis of Converter Transformer Inter‐tap Short‐circuit Faults in On‐load Tap Changers

Numerical Research on Switching Arc of Circuit Breaker

Modeling and Analysis of Oil Flow Distribution in Oil-Immersed Transformer Under External Fault

Research of Simulation Technique of Electric Arc in Air Switch and Its Applications

Simulation of Arc Dwelling Behavior During Bridge-Type Contacts Opening Process for High-Power Relay

Numerical Simulation on Pressure Field in Chamber of Low-Voltage Circuit Breaker in Different Conditions

CFD Simulations of the Air/Water Two-phase Flow in an Annular Centrifugal Contactor