Abstract:Purpose - The purpose of this paper is to provide an accurate dynamic model for the flexible cable capture mechanism and to analyze the dynamic characteristics in the capturing process.Design/methodology/approach - The absolute nodal coordinate formulation (ANCF) that based on the continuum mechanics approach is applied in the capture task using flexible cables. An ANCF cable element in which axial and bending strain energy are taken into account is presented to model the flexible cables. The generalized coordinates of ANCF are absolute displacements and slopes and make no small deformation assumptions; therefore, this element has a remarkable superiority in the large rotation and deformation analysis of flexible cables compared to the conventional floating frame of reference formulation (FFRF). The mass matrix of the cable element is constant, which will reduce the degree of non-linearity of the dynamic equations. The contact force between the steel cables and capture rod is calculated by the non-linear contact dynamic model, in which material and geometry properties of contact bodies are considered.Findings - The stress distribution of steel cables is investigated in the numerical studies which show that the closer to the ends of the cable, the larger axial forces and smaller bending moments they will be. The reduction of grasping velocity will lead to a decrease in the contact force and the oversize peak value of contact force is more likely to be avoided when reducing the elastic modulus of steel cables to obtain a greater soft capture capability.Practical implications - The work shows a practical possibility to improve modeling accuracy of the capture mechanism. Results of the analyses can provide references for the design and analysis of the capture task.Originality/value - The ANCF is first used in the analysis of the capture task with flexible cables, and some useful results which have not been published before are obtained.

Design and Analysis of a Planar Flexible Cable Driven Target Motion Device

Design and workspace analysis of a cable-driven space capture robot for noncooperative targets

Trajectory Tracking Control for a Cable-Driven Space Manipulator Using Time-Delay Estimation and Nonsingular Terminal Sliding Mode

High-speed Point-to-point Trajectory Planning of a 2-DOF Cable Driven Parallel Manipulator

Towards Safe and Aggressive Motion Generation for Dynamic Targets Pick-and-Place

Dynamic Trajectory Planning of A 3-Dof Under-Constrained Cable-Driven Parallel Robot

Modeling, Cooperative Planning and Compliant Control of Multi-arm Space Continuous Robot for Target Manipulation

Research on the Dynamic Trajectory of Cable-Suspended Parallel Robot Considering the Uniformity of Cable Tension

Dynamic trajectory planning for a spatial 3-DoF cable-suspended parallel robot

Trajectory Tracking and Vibration Control of Flexible Beams in Multi-Axis System

Design and Motion Control of Space Net Projectiles System

A Dynamical Approach to Space Capturing Procedure Using Flexible Cables

The controller design of microgravity system on ground

Mechanics Modeling and Simulation of Flexible Cable on Spacecraft Considering Spatial Constraints

Vibration Suppression Control of Free-Floating Space Robots with Flexible Appendages for Autonomous Target Capturing

Torque Resistance Analysis and Dynamic Trajectory Planning for 3-DOF Cable Suspended Parallel Robot with Parallelogram Cable Loops

Dynamics and Control of Noncooperative Space Target Capture Using a Flexible Manipulator

Modeling and Capture Dynamics of Flexible Cables Used in Large-scale Space End-effector

Kinematics Analysis and Trajectory Planning of Force Feedback Device

Dynamic Trajectory Planning and Geometric Analysis of a Two-Degree-of-Freedom Translational Cable-Suspended Planar Parallel Robot Using a Parallelogram Cable Loop

Design and Analysis of a Yoshimura Continuum Actuator