Abstract:Since most of the cable-driven parallel manipulators (CDPMs) are small in dimension or low in speed, the self-weight or inertia of the cable is neglected when dealing with the problems of kinematics, dynamics and workspace. The cable is treated as a massless straight line, and the inertia of the cable is not discussed. However, the camera robot is a large-span high-speed CDPM. Thus, the self-weight and inertia of the cable cannot be negligible. The curved cable due to the self-weight is modeled as a catenary to accurately account for its sagging effect. Moreover, the dynamic model of the camera robot is derived by decomposing the motion of the cable into an in-plane motion and an out-plane motion, based on which an iterative-based tension distribution algorithm and a workspace generation algorithm are presented. An optimization model is presented to simultaneously improve the workspace volume, anti-wind disturbance ability and impulse of tensions on the camera and pan–tilt device system (CPTDS) by selecting the proper optimal variables under the linear and nonlinear constraints. An improved genetic algorithm (GA) is proposed, and the simulation results demonstrate that the improved GA offers a stronger ability in global optimization compared to the standard genetic algorithm (SGA). The ideal-point method is employed to avoid the subjective influence of the designer when performing the multi-objective optimization, and a remarkable improvement of the performance is obtained through the optimization. Furthermore, the distribution characteristics of the optimization objects are studied, and some valuable conclusions are summarized, which will provide some valuable references in designing large-span high-speed CDPMs.

Research on the Dynamic Trajectory of Cable-Suspended Parallel Robot Considering the Uniformity of Cable Tension

Torque Resistance Analysis and Dynamic Trajectory Planning for 3-DOF Cable Suspended Parallel Robot with Parallelogram Cable Loops

Research on the dynamic trajectory of spatial cable-suspended parallel manipulators with actuation redundancy

Dynamic Trajectory Planning and Geometric Analysis of a Two-Degree-of-Freedom Translational Cable-Suspended Planar Parallel Robot Using a Parallelogram Cable Loop

Dynamic Trajectory Planning of Planar Two-Dof Redundantly Actuated Cable-Suspended Parallel Robots

Workspace Analysis and Optimal Design of a Translational Cable-Driven Parallel Robot with Passive Springs

Stability analysis and optimal design of a cable-driven parallel robot

Performance Simulation and Energetic Analysis of TBot High-Speed Cable-Driven Parallel Robot

Research on Controllable Stiffness of Redundant Cable-Driven Parallel Robots

Optimization and Implementation of a High-Speed 3-Dofs Translational Cable-Driven Parallel Robot

Cable Path Analysis and Kinematic Control of a Cable-Driven Parallel Robot Allowing Cables to Wrap on Cylinders or Spheres

State-of-the-art on Theories and Applications of Cable-Driven Parallel Robots

Dynamic Characteristics Analysis of Integrated Cable-Driven Parallel Robots

Motion control strategy and stability analysis for high-speed cable-driven camera robots with cable inertia effects

Dynamic Modeling, Workspace Analysis and Multi-Objective Structural Optimization of the Large-Span High-Speed Cable-Driven Parallel Camera Robot

Analysis Of Stiffness Controllability Of A Redundant Cable-Driven Parallel Robot Based On Its Configuration

Non-iterative Geometric Method for Cable-Tension Optimization of Cable-Driven Parallel Robots with 2 Redundant Cables

Calculation and Analysis of Constant Stiffness Space for Redundant Cable-Driven Parallel Robots

Kinematic performance-based path planning for cable-driven parallel robots using modified adaptive RRT*

Design and Control of a Novel Cable Driven Parallel Mechanism

Design Analysis of a Cable-Driven Parallel Robot with Parallel Cables for Ship Side Painting