Abstract:A nonlinear stiffness actuator (NSA) can achieve high torque/force resolution in the low stiffness range and high bandwidth in the high stiffness range. However, for the NSA, due to the imperfect performance of the elastic mechanical component such as friction, hysteresis, and unmeasurable energy consumption caused by former factors, it is more difficult to achieve accurate position control compared to the rigid actuator. Moreover, for a compliant robot with multiple degree of freedoms (DOFs) driven by NSAs, the influence of every NSA on the trajectory of the end effector is different and even coupled. Therefore, it is a challenge to implement precise trajectory control on a robot driven by such NSAs. In this paper, a control algorithm based on the Terminal Sliding Mode (TSM) approach is proposed to control the end effector trajectory of the compliant robot with multiple DOFs driven by NSAs. This control algorithm reduces the coupling of the driving torque, and mitigates the influence of parametric variation. The closed-loop system’s finite time convergence and stability are mathematically established via the Lyapunov stability theory. Moreover, under the same experimental conditions, by the comparison between the Proportion Differentiation (PD) controller and the controller using TSM method, the algorithm’s efficacy is experimentally verified on the developed compliant robot. The results show that the trajectory tracking is more accurate for the controller using the TSM method compared to the PD controller.

Tracking Control with Adjustable Trajectory Envelope for Cable-Driven Robots

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

High Performance Motion Trajectory Tracking Control of Pneumatic Cylinders: A Comparison of Some Nonlinear Control Algorithms

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Adaptive robust output force tracking control of pneumatic cylinder while maximizing/minimizing its stiffness

Two-Stage Trajectory-Tracking Control of Cable-Driven Upper-Limb Exoskeleton Robots with Series Elastic Actuators: A Simple, Accurate, and Force-Sensorless Method

Compliant Tracking Control and Force Redistribution for a Portable Cable-Driven Robot

Dual-Loop Control of Cable-Driven Snake-like Robots

Trajectory Tracking Control for a Cable-Driven Space Manipulator Using Time-Delay Estimation and Nonsingular Terminal Sliding Mode

A Generalized Trajectory Tracking Controller for Robot Manipulators with Bounded Inputs

Adaptive recursive sliding mode based trajectory tracking control for cable-driven continuum robots

Trajectory tracking control for robot manipulators with bnounded torque inputs via fuzzy PD

Trajectory Tracking of Robot Based on Adaptive Theory

Adaptive Passivity-Based Pose Tracking Control of Cable-Driven Parallel Robots for Multiple Attitude Parameterizations

Adaptive Control for a Cable Driven Robot Arm

Two trajectory tracking control methods for space hyper-redundant cable-driven robots considering model uncertainty

Dynamic modeling and trajectory tracking control method of segmented linkage cable-driven hyper-redundant robot

Direct Adaptive Robust Control Of A Cable-Pulley System

A Trajectory Tracking Control Based on a Terminal Sliding Mode for a Compliant Robot with Nonlinear Stiffness Joints