Abstract:Lower-limb exoskeletons can aid restoring mobility in people with movement disorders. Cable-driven exoskeletons can offload their actuators away from the human body to reduce the weight imposed on the user and enable precise control of joints. However, ensuring limb coordination through bidirectional motion control of joints using cables raise the technical challenge of preventing the occurrence of undesired cable slackness or counteracting forces between cables. Thus, motivation exists to develop a control design framework that integrates both a joint control loop to ensure suitable limb tracking and a cable control loop to maintain cable tension properly. In this article, a two-layer control structure consisting of high and low-level controllers are developed to ensure a knee-joint exoskeleton system follows the desired joint trajectories and adjusts the cable tension, respectively. A repetitive learning controller is designed for the high-level knee joint tracking objective motivated by the periodic nature of the desired leg swings (i.e., to achieve knee flexion and extension). Low-level robust controllers are developed for a pair of cables, each actuated by an electric motor, to track target motor trajectories composed of motor kinematics and offset angles to mitigate cable slackness. The offset angles are computed using admittance models that exploit measurements of the cable tensions as inputs. Each electric motor switches its role between tracking the knee joint trajectory (i.e., the motor acts as the leader motor to achieve flexion or extension) and implementing the low-level controller (i.e., the motor acts as the follower motor to reduce slackness). Hence, at any time, one motor is the leader and the other is the follower. A Lyapunov-based stability analysis is developed for the high-level joint controller to ensure global asymptotic tracking and the low-level follower controller to guarantee global exponential tracking. The designed controllers are implemented during leg swing experiments in six able-bodied individuals while wearing the knee joint cable-driven exoskeleton. A comparison of the results obtained in two trials with and without using the admittance model (i.e., exploiting cable tension measurements) is presented. The experimental results indicate improved knee joint tracking performance, smaller control input magnitudes, and reduced cable slackness in the trial that leveraged cable tension feedback compared to the trial that did not exploit tension feedback.

Two-Stage Trajectory-Tracking Control of Cable-Driven Upper-Limb Exoskeleton Robots with Series Elastic Actuators: A Simple, Accurate, and Force-Sensorless Method

An adaptive compliance position control based on EKF for series elastic actuation

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

Closed-Loop Kinematic and Indirect Force Control of a Cable-Driven Knee Exoskeleton: A Lyapunov-Based Switched Systems Approach

Dual-Loop Control of Cable-Driven Snake-like Robots

Closed-loop Control Design and Motor Allocation for a Lower-limb Cable-driven Exoskeleton: A Switched Systems Approach

Single-input adaptive fuzzy sliding mode control of the lower extremity exoskeleton based on human–robot interaction:

Adaptive robust backstepping force control of 1-dof joint exoskeleton for human performance augmentation

Multi-modal control scheme for rehabilitation robotic exoskeletons

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Tracking control with external force self-sensing ability based on position/force estimators and non-linear hysteresis compensation for a backdrivable cable-pulley-driven surgical robotic manipulator

Research on Trajectory Tracking of Lower Limb Exoskeleton Rehabilitation Robot Based on Sliding Mode Control

Tracking Control with Adjustable Trajectory Envelope for Cable-Driven Robots

Development, Dynamic Modeling, and Multi-Modal Control of a Therapeutic Exoskeleton for Upper Limb Rehabilitation Training

A cable-driven exosuit for upper limbs: design, control, and evaluation

A Realistic Model Reference Computed Torque Control Strategy for Human Lower Limb Exoskeletons

Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking

An adaptive controller for human lower extremity exoskeleton robot

A Hybrid Method Combining Data-Driven and Model-Based Algorithms for External Force-Sensing and Haptics Control of Cable-Pulley-Driven Surgical Robotic Manipulator

Adaptive Gravity Compensation Control of a Cable-Driven Upper-Arm Soft Exosuit