Abstract:Self-centering (SC) precast wall structures have emerged as earthquake-resilient structural systems with excellent seismic performances characterized by low damage as well as negligible post-earthquake residual deformation. However, research on SC wall systems often ignores infill walls for simplicity, which results in difficulty to achieve an integrated resilient structural system. To fill this gap, this paper presents a comprehensive assessment of SC precast concrete wall structures with three different types of infill walls and compares the results with that without infill walls. The maximum inter-story drift, the peak floor acceleration, and the damage index of the considered systems at different seismic intensities are calculated through incremental dynamic analysis. The assessment is then expanded from fragility to risk by evaluating the probabilities of exceeding each potential limit state throughout the service life. Results show that, despite merely no damage to the SC wall itself, the integral system could sustain significant damage due to the damage to the infills attached. What’s more, with stronger infill walls, severer damage to the integral system is likely to be. Among the three infills considered in this study, the one with sliding joints performs the best from the perspective of damage, resulting in a smaller likelihood of 21%∼60% exceeding various damage limits than that of traditional infills. However, the sliding joint infill’s benefit in damage is at the expense of larger drift and slightly higher acceleration responses compared with traditional infills. It is concluded that the infills considered in this paper all have their drawbacks and new infills that combine the sliding mechanism (to reduce damage) and higher damping (to reduce drift and acceleration) are encouraged to develop an integrated resilient system.

Seismic Modeling Of Infill Walls

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Cyclic Response of Infilled RC Frames with Window and Door Openings: Experimental Results and Damage Interpretation

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

Dissipation in Sheathing-to-framing Connections of Light-Frame Timber Shear Walls under Seismic Loads

Influence of Masonry Infill Walls on the Seismic Assessment of Non-Seismically Designed RC Framed Structures

Field measurements for calibration of simplified models of the stiffening effect of infill masonry walls in high-rise RC framed and shear-wall buildings

Local infill-frame interaction under seismic loads: Investigation through refined micro-modeling

Simulation and analysis of infilled-wall cracks' development by shrinkage using semi-discrete and whole type model

A parametric study in reinforced concrete frames with different infill wall materials

Assessment of the effects of infill walls’ layout in plan and/or elevation on the seismic performance of 3D reinforced concrete structures

Seismic design of RC moment-resisting frames with concrete block infill walls considering local infill-frame interactions

Experimental and numerical study on seismic behavior of shear wall with cast‐in situ concrete infilled walls

Seismic fragility and risk assessment of self-centering wall structures with traditional and sliding joint infill walls

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Seismic assessment of the in‐plane/out‐of‐plane interaction of masonry infills in a two‐storey RC building subjected to bi‐directional shaking table tests

Development of a Seismic Design Approach for Infill Walls Equipped with Structural Fuse

Seismic performance of prefabricated wall panels with sliding joints for reinforced concrete frames

Out-of-plane Response of an Innovative Masonry Infill with Sliding Joints from Shaking Table Tests

Seismic Protection of RC Buildings by Polymeric Infill Wall-Frame Interface