Abstract:The U.S. Navy is pursuing the design and fabrication of a superconducting magnet system cooled by closed cycle cryogenic refrigerators; no liquid helium will be used at all to cool the superconducting magnet. Well characterized superconducting magnet materials and thermally efficient interfaces between cryocoolers and the magnet, current leads, and radiation shields are critical because of the limited cooling capacity of cryocoolers being considered. In order to determine the thermal conductivity or conductance of several magnet composites and interfaces, respectively, a variable temperature apparatus has been developed which incorporates a Gifford-McMahon(GM) cryocooler. High heat capacity neodymium is used in the GM’s second stage regenerator and in a thermal filter used to smooth normally occurring temperature oscillations inherent to GM cryocoolers. In addition to good thermal performance, connections between the leads and coolers, and the magnet and coolers must be good electrical isolators to protect against damaging high voltages developed during magnet quenches. Measurements of thermal conductivity and conductance are made in the range of 6.0 K–35.0 K. This range is chosen to encompass the probable operating temperatures of conductively cooled NbTi, Nb3Sn, and high Tc magnets. Design, fabrication, and general operation of the thermal conductivity measuring apparatus are presented and discussed.

A Versatile Cryostat and a Mutual Inductance Coil for A.c. Susceptibility Measurements on High Tc Superconductors

Variable Temperature Thermal Conductivity and Conductance Measurements Using a Gifford-McMahon Cryocooler

RETRACTED: Development of a Cryogenic Test Bed for High Amperage Critical Current Measurement on High Temperature Superconductor Wire

Simple test for high Jc and low Rs superconducting thin films

High-Tc Superconductor Detection Coils for a Magnetic Resonance System

Temperature Detection Circuit on the Low-Temperature Superconducting Coils

Thermal spectrometer for superconducting circuits

AC Magnetic Susceptibility: Mathematical Modeling and Experimental Realization on Poly-Crystalline and Single-Crystalline High-Tc Superconductors YBa2Cu3O7−δ and Bi2−xPbxSr2Ca2Cu3O10+y

A versatile 4 K insert for characterization of the superconducting joints

A pulsed current set-up for use in magnetic fields above 30 T; application to high-temperature superconductors

Three terminal capacitance technique for magnetostriction and thermal expansion measurements

Critical-Current and Its Determination on Tlsr2ca2ba2cu3oy by Ac Susceptibility Measurement

AC Analysis of a High Temperature Superconductor Coil with Short Circuits

Dynamic Range of High Temperature Superconducting Josephson Detecting Systems at Millimeter-Wave Band

A High-Temperature Superconducting Millimeter Wave Detecting System Based on Pulse Tube Cryocooler

Test Facility for Critical Current Measurement of Superconducting Conductors

A high-Q superconducting toroidal medium frequency detection system with a capacitively adjustable frequency range >180 kHz

Development of in Situ Two-Coil Mutual Inductance Technique in a Multifunctional Scanning Tunneling Microscope.

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

Mutual Inductance Measurement of the Superconducting Coil for the Joule Balance

Temperature Measurement on Copper Surfaces for Superconducting Thin Film Cavity Applications