Abstract:The AC losses, the current density and the magnetic field are important variables to design devices made of High Temperature Superconductors (HTS). These variables are often numerically computed using a transient finite element analysis even though the interest may lay in the steady-state regime of the device. The need for solving time-dependent variables has led to improve the computation time with efficient finite element models (FEM) relying on different formulations. These transient FEM are computationally slow and demanding in terms of resources. In the present work, an alternative path is taken with the development of a frequency-domain FEM using a phasor representation to alleviate the computation burden. This model does not have the versatility of the transient models. However, it can generate the initial steady-state conditions for a subsequent transient analysis. It is perfectly adapted to study the steady-state regime of HTS devices operated in AC conditions. In this phasor modelling approach, the Root Mean Square (RMS) resistivity of the superconductor is introduced. It is subsequently approximated by an exponential function introducing a factor to ease its implementation in the commercial software COMSOL Multiphysics with the most recent and fastest formulations T-A and J-A. The case studies encompass single BSCCO and REBCO tapes as well as a CORC cable or specifically, in the present work, a CORT (Conductor on Round Tube). The results of the time- and frequency-domain FEM simulations are compared against experimental data. The comparison of the models' results is carried out comparing the current density distributions as well as the AC losses. The comparison against experimental data is only conducted on the AC losses. In the present case, it is used to quantify thoroughly the accuracy of the numerical results compared to the measurements. A reasonable agreement between those results and the experimental data was found.

AC Analysis of a High Temperature Superconductor Coil with Short Circuits

A Real-time Monitoring System for Investigating Electromagnetic Behaviors of An HTS Coil

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Test and Analysis of Electromagnetic and Mechanical Properties of HTS Coil During Quench State

Examination and Analysis of Critical Current Uniformity of Long HTS Tapes by the MCorder

Characteristic and magnetic field analysis of a high temperature superconductor axial-flux coreless induction maglev motor

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Experimental Study on AC Loss of 1G and 2G HTS Coils with an Identical Structure, Geometry and Number of Turns

A Quench detection method for closed-loop superconducting coils based on currents redistribution in co-windings

A frequency-domain finite element model for simulating high-temperature superconductors using the J-A and T-A formulations

A quench detection method for parallel co-wound HTS coils based on current redistribution

Temperature Distribution in the Field Coil of a 500-kW HTS AC Homopolar Motor

Inductance of Low-Frequency Small-Scale High-Temperature Superconducting Coils

Electromagnetic Analysis Of An Air-Core Hts Transformer

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

Fast evaluation of the critical current of high-temperature superconducting coils based on the integral method

Analysis of fields in an air-cored superconducting synchronous motor with an HTS racetrack field winding

Numerical determination of the threshold magnetic field in superconducting strips and coils triggering dynamic resistance

The Improved Magnetic Shield Type High T/sub C/ Superconducting Fault Current Limiter and the Transient Characteristic Simulation

A pulsed current set-up for use in magnetic fields above 30 T; application to high-temperature superconductors

Electromechanical Analysis of HTS Cage Rotors for Induction-Synchronous Machines