Abstract:The technology development of micro-nano electronics in global IC industry is summarized and reviewed in the present paper. There are many challenges and opportunities as the innovative devices and materials have gradually been applied to IC manufacture. As ITRS 2011 Roadmap shows that gate length will shrink to 20 nm in 2013, the industry mainstream manufacturing technologies of the nano-electronics seems moving toward the goal. It is well known that the IC technology development basically depends on material science. In Section 2, some new material and process technologies are highlighted, such as strained silicon, high K and metal gate, ultra-low K, 450 mm silicon wafer, and immersion lithography technologies are the foundation of IC manufacture. The process integration for advanced CMOS manufacture technology is discussed in Section 3. As an example, 20 nm process flow scheme is explained and some comparison is made to the precious generation technology. The main process flow difference between 28 nm technology and 20 nm technology is illustrated and some explanations are presented. In Section 4, 3D system packaging technology is introduced. Some preliminary TSV experimental data made by SMIC are shown. It is expected that 3D TSV Wide I/O would eventually be inevitable in 28 nm production and beyond. In Section 5, the research and development of nonvolatile memory are summarized, such as RRAM, PcRAM and MRAM. Some lab experimental and measurement results from SMIC are demonstrated. It is believed that PcRAM, which is relatively mature technology, mass production will probably come up in the mainland in a few years. In Section 6, a couple of new transistor architectures are introduced and some experimental data are demonstrated, such as local SOI and GAA, and some experimental data are shown. Finally, the comments for domestic R&D strategy in IC area are proposed to future IC R&D direction.

Design Trends and Challenges of Logic Soft Errors in Future Nanotechnologies Circuits Reliability

Design of probabilistic-based Markov Random Field logic gates in 65nm CMOS technology

Soft-Error Tolerance Analysis and Optimization of Nanometer Circuits

Design of Nano-Scale Noise Tolerant CMOS Logic Circuits Based on Probabilistic Markov Random Field Approach

Impact of Supply Noise on Nano-Meter VLSI Design: Hard or Soft Threshold?

Combining Circuit Level and System Level Techniques for Defect-Tolerant Nanoscale Architectures

Statistical Analysis of Soft Error Rate in Digital Logic Design Including Process Variations

Soft Error Generation Analysis In Combinational Logic Circuits

Tolerating Soft Errors in Processor Cores Using CLEAR (Cross-Layer Exploration for Architecting Resilience)

On the ESD Protection and Non-Fatal ESD Strike on Nano CMOS Devices

Application Specified Soft-Error Failure Rate Analysis Using Sequential Equivalence Checking Techniques

Research on Fault-tolerant Techniques Based on Interwoven Redundancy for Nanoscale Circuits

Fault-Tolerant Nanoscale Processors on Semiconductor Nanowire Grids.

In-Field Logic Repair of Deep Sub-Micron CMOS Processors

Non-probabilistic reliability-based structural design optimization based on the interval analysis method

An efficient methodology to evaluate nanoscale circuit fault-tolerance performance based on belief propagation

On the Characterization and Optimization of On-Chip Cache Reliability Against Soft Errors

Variability- and Reliability-Aware Design for 16/14nm and Beyond Technology

CLEAR: Cross-Layer Exploration for Architecting Resilience - Combining Hardware and Software Techniques to Tolerate Soft Errors in Processor Cores

Techniques to Reduce the Soft Error Rate of a High-Performance Microprocessor

Machine Learning in Nanometer AMS Design-for-Reliability : (invited Paper)