Abstract:In the last few years, due to the large amount of greenhouse gas emissions causing environmental issue like global warming, methods for the full consumption and utilization of greenhouse gases such as carbon dioxide (CO2) have attracted great attention. In this study, a packed-bed dielectric barrier discharge (DBD) coaxial reactor has been developed and applied to split CO2 into industrial fuel carbon monoxide (CO). Different packing materials (foam Fe, Al, and Ti) were placed into the discharge gap of the DBD reactor, and then CO2 conversion was investigated. The effects of power, flow velocity, and other discharge characteristics of CO2 conversion were studied to understand the influence of the filling catalysts on CO2 splitting. Experimental results showed that the filling of foam metals in the reactor caused changes in discharge characteristics and discharge patterns, from the original filamentary discharge to the current filamentary discharge as well as surface discharge. Compared with the maximum CO2 conversion of 21.15% and energy efficiency of 3.92% in the reaction tube without the foam metal materials, a maximum CO2 decomposition rate of 44.84%, 44.02%, and 46.61% and energy efficiency of 6.86%, 6.19%, and 8.85% were obtained in the reaction tubes packed with foam Fe, Al, and Ti, respectively. The CO2 conversion rate for reaction tubes filled with the foam metal materials was clearly enhanced compared to the non-packed tubes. It could be seen that the foam Ti had the best CO2 decomposition rate among the three foam metals. Furthermore, we used density functional theory to further verify the experimental results. The results indicated that CO2 adsorption had a lower activation energy barrier on the foam Ti surface. The theoretical calculation was consistent with the experimental results, which better explain the mechanism of CO2 decomposition.

Effects of discharge parameters on carbon dioxide conversion in TiO 2 packed dielectric barrier discharge at atmospheric pressure

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Effect of filling materials on CO2 conversion with a dielectric barrier discharge reactor

Mechanism of plasma chemistry in CO2 hydrogenation using a dielectric barrier discharge reactor

Control of Flow Stabilized Positive Corona Discharge Modes and NO Removal Characteristics in Dry Air by C02 Injections

[Scale-Up Study on Pulse Corona Discharge for the Removal of Toluene].

Scale-up Experiment of Plasma Reactors with Different Electrode Structure

Processing of COx Molecules in CO2/O2 Gas Mixture by Dielectric Barrier Discharge: Understanding the Effect of Internal Parameters of the Discharge

DBD Plasma Combined with Different Foam Metal Electrodes for CO2 Decomposition: Experimental Results and DFT Validations

Comprehensive study on discharge characteristics in pulsed dielectric barrier discharges with atmospheric He and CO2

Investigation of Dry Reforming of Methane in a Dielectric Barrier Discharge Reactor

Experimental Studies of Removing Typical VOCs by Dielectric Barrier Discharge Reactor of Different Sizes

Scale-up investigation on pulse corona for the removal of toluene

Decomposition of Co2 Using Dc Corona Discharge at Atmospheric Pressure

CO2-CH4 conversion and syngas formation at atmospheric pressure using a multi-electrode dielectric barrier discharge

The Mutual Conversion of CO2 and CO in Dielectric Barrier Discharge (DBD)

An Integrated Approach to Understanding the Mass Transfer and Reaction Processes in a Pulsed High-Voltage Discharge Reactor

Phenol Degradation by TiO2 Photocatalysts Combined with Different Pulsed Discharge Systems.

Decomposition of CO2 Using Pulsed Corona Discharges Combined with Catalyst

The Characteristics of Adsorption,desorption and Degradation of Carbon Tetrachloride under Electric Discharge Action

CONVERSION OF CO2 TO CO USING PULSED CORONA DISCHARGES AND CATALYST