Abstract:In this paper a large-scale pulsed corona system is described in which pulse parameters such as pulse rise-time, peak voltage, pulse width and energy per pulse can be varied. The chemical efficiency of the system is determined by measuring ozone production. The temporal and spatial development of the discharge streamers is recorded using an ICCD camera with a shortest exposure time of 5 ns. The camera can be triggered at any moment starting from the time the voltage pulse arrives on the reactor, with an accuracy of less than 1 ns. Measurements were performed on an industrial size wire-plate reactor. The influence of pulse parameters like pulse voltage, DC bias voltage, rise-time and pulse repetition rate on plasma generation was monitored. It was observed that for higher peak voltages, an increase could be seen in the primary streamer velocity, the growth of the primary streamer diameter, the light intensity and the number of streamers per unit length of corona wire. No significant separate influence of DC bias voltage level was observed as long as the total reactor voltage (pulse + DC bias) remained constant and the DC bias voltage remained below the DC corona onset. For those situations in which the plasma appearance changed (e.g. different streamer velocity, diameter, intensity), a change in ozone production was also observed. The best chemical yields were obtained for low voltage (55 kV), low energetic pulses (0.4 J/pulse): 60 g (kWh)(-1). For high voltage (86 kV), high energetic pulses (2.3 J/pulse) the yield decreased to approximately 45 g (kWh)(-1), still a high value for ozone production in ambient air (RH 42%). The pulse repetition rate has no influence on plasma generation and on chemical efficiency up to 400 pulses per second.

Scale-up investigation on pulse corona for the removal of toluene

[Scale-Up Study on Pulse Corona Discharge for the Removal of Toluene].

Scale-up Experiment of Plasma Reactors with Different Electrode Structure

Experimental program of the pulsed corona tar cracker

From Chemical Kinetics to Streamer Corona Reactor and Voltage Pulse Generator

Styrene removal using corona discharge combined with nanosecond pulse power supply

Pulsed Corona Tar Cracker

Temporal development and chemical efficiency of positive streamers in a large scale wire-plate reactor as a function of voltage waveform parameters

An Industrial Streamer Corona Plasma System for Gas Cleaning

A High-Voltage Pulse Generator for Corona Plasma Generation

Removal of Dilute VOCs in Air by Post-Plasma Catalysis over Ag-based Composite Oxide Catalysts

Toluene Decomposition by a Two-stage Hybrid Plasma Catalyst System in Dry Air

Streamer Corona Plasma for Fuel Gas Cleaning: Comparison of Energization Techniques

A repetitive high-voltage pulse source for pulsed corona treatment of gases

Characteristics of Back Corona Discharge in a Honeycomb Catalyst and Its Application for Treatment of Volatile Organic Compounds.

Utilizing catalyst to enhance pulse discharge for volatile organic compounds treatment

The Removal of Toluene by Corona Combined with Catalysis

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Decomposition of Toluene in A Rotating Glidarc Discharge Reactor

Decomposition Characteristics of Toluene by a Corona Radical Shower System.

Degradation of toluene by tube-tube coaxial dielectric barrier discharge: power characteristics and power factor optimization