Abstract:An accurate temperature analysis of electronic packaging requires an understanding of the thermal-transport parameters of the material. However, studies on the thermal conductivity of intermetallic compounds (IMCs) in micro-interconnect solder joints are scarce, particularly common IMCs forming in Cu-Sn systems, which seriously affect the precise prediction of the temperature field and thermal stress for electronic packaging structures. This work proposes a novel method to quantitatively measure the thermophysical parameters of Cu-Sn IMCs based on the dual-wavelength femtosecond laser timedomain thermoreflectance (TDTR) system. Cu-Sn diffusion couple samples were prepared using a reflow and aging process. Two layers of Cu6Sn5 and Cu3Sn IMCs formed at the interface with micron thickness, and the (001) crystal plane of Cu6Sn5 was the preferred orientation. The sensitivity of the experimental parameters to the measurement parameters affects the fitting accuracy. Therefore, before testing, the effects of the aluminum transducer thickness and pump laser modulation frequency on the phase signal sensitivity in the thermal conductivity measurements of Cu6Sn5 and Cu3Sn were analyzed to help select the specific experimental parameters. After testing, the thermal conductivities of Cu6Sn5 and Cu3Sn were 47.4 and 87.6 W/(m center dot K), respectively, which are slightly higher than the previous results because of the microstructure discrepancy caused by different material preparation techniques. Finally, the influence of the pump laser diameter, aluminum transducer thickness, and material specific heat on the measurement error of thermal conductivity for Cu6Sn5 and Cu3Sn was examined. The test errors of the Cu6Sn5 and Cu3Sn thermal conductivity were -6.8%similar to 4.6% and -7.1%similar to 4.4%, respectively. Overall, the TDTR technology can evaluate the thermal-transport characteristics of micron-scale intermetallic compounds in electronic packaging and guide the thermal design and reliability evaluations of electronic components.

Research On Measuring The Transient Temperature Of Selective Laser Sintering

Measurement of radiation temperature with high time-resolution

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

Intelligent Measuring System for Performance Parameters of Laser Range Finder

A novel measurement system for silicon melt level in Czochralski crystal pullers based on laser triangulation

Melt Level Measurement for the CZ Crystal Growth Using an Improved Laser Triangulation System

Research on a dedicated thin-film thermocouple testing system for transient temperature measurement

Research advance of measurement of thermo-physical property of micro-nano material with femtosecond laser

Research on the Real-time Measurement for the Thermal Distortion of the Spindle in Machine Tools by Using High Accuracy Displacement Sensor

Research on Transient Temperature Rise Measurement Method for Semiconductor Devices Based on Photothermal Reflection

Simultaneous measurement of normal spectral emissivity and temperature of materials with low thermal conductivity

Investigations on the Thermal Conductivity of Micro-Scale Cu-Sn Intermetallic Compounds Using Femtosecond Laser Time-Domain Thermoreflectance System

Finite Element Simulation of Temperature Field in Si/Fe Powder Mixtures During Selective Laser Sintering

Transient emission wavelength estimation for DFB laser with temperature tuning

Measurements of electron-phonon coupling factor and interfacial thermal resistance of metallic nano-films using a transient thermoreflectance technique

The realization of a laser on-line measuring system for determining diameters of high-temperature melts

Accurate Direct Measurements of Far-Field Thermal Infrared Emission and its Dynamics

Optical System for On-Line Monitoring and Temperature Control in Selective Laser Melting Technology

A High Precision and Multifunctional Electro-Optical Conversion Efficiency Measurement System for Metamaterial-Based Thermal Emitters

Accurate measuring temperature by infrared thermal imaging system in vacuum and cryogenic environment

High temperature imaging dynamic measurement techniques under harsh experimental environment