Abstract:A Si(220) double-crystal monochromator for the energy range 10–30 keV is presented. It will be used for EXAFS as well as powder diffraction measurements. To determine the requirements for this monochromator we looked, apart from mean considerations, at the requirements dictated by EXAFS in transmission mode. For good data analyses the proper shape, amplitude, and location at the energy axis of each wiggle is required. Moreover it is essential to separate the wiggles from background and noise. For the latter a high flux through the sample is desirable, which can be achieved by horizontal focusing of the beam. For that we have chosen to bend the second crystal sagitally. The sagittal bending radius is adjustable between 50 and 0.8 m, because for different energies different sagittal radii are necessary to focus the beam on the sample. The mean meridional radius of the second crystal is fixed at 130 m, which is an optimization for 20 keV. The meridional radius of the first crystal can be tuned between 100 and 500 m. When this radius is set to 130 m the energy resolution is calculated to be 6, 3, and 35 eV for 10, 20, and 30 keV (for perfectly bent crystals). By changing the meridional radius of the first crystal, future users of this monochromator can make the trade off between resolution and intensity. Movement of the monochromator exit beam, during a scan, will occur due to the monochromator geometry, but is reduced as much as possible by using an asymmetrically cut second crystal, with an asymmetry angle of 2.5°. The average exit beam movement of the monochromator for a 1-keV scan is 20 μm. For 40% of the energy range (10–30 keV) the exit beam position remains within 10 μm. For the second crystal no translation stage is used. When using a translation stage it is difficult to keep the change in flux within acceptable limits, because an alignment error of 0.01 arcsec at 30 keV will result in a change in intensity of 1%.

The Characteristics of the Channel-Cut Crystal Modulating Collimated Synchrotron Radiation Beam

Measurement of the Reflection Curve of Crystals Used in the Monochromator of X-ray Diffraction Beamline at NSRL

A novel measurement system for silicon melt level in Czochralski crystal pullers based on laser triangulation

Diamond Channel-Cut Crystals for High-Heat-Load, Beam-Multiplexing, Narrow-Band X-ray Monochromators

Double-edge scan wavefront metrology and its application in crystal diffraction wavefront measurements

Quantitative X-ray Channel-Cut Crystal Diffraction Wavefront Metrology Using the Speckle Scanning Technique

Thermal deformation of cryogenically cooled silicon crystals under intense X-ray beams: measurement and finite-element predictions of the surface shape

Theoretical considerations on the design of three-beam X-ray monochromators for synchrotron radiation

Measurements of transmitted electron beam extinction through si crystal membranes

A dynamic focusing x‐ray monochromator for a wiggler beam line at the SRS of the SERC Daresbury Laboratory (abstract)

Crystal channeling investigations at medical synchrotron regimes

A thermal deformation optimization method for cryogenically cooled silicon crystal monochromators under high heat load

Diffraction imaging for in-situ characterization of double-crystal x-ray monochromators

Measurement of integral diffraction coefficients of crystals on beamline 4B7 of Beijing Synchrotron Radiation Facility

A polarization-switch effect of silicon crystals under multiple-beam diffraction geometry

Increased spatial coherence length from an asymmetric crystal reflection at grazing exit

Comparison of theory, simulation, and experiment for dynamical extinction of relativistic electron beams diffracted through a si crystal membrane

Modelling the power threshold and optimum thermal deformation of indirectly liquid‐nitrogen cryo‐cooled Si monochromators

In situ/operando method for energy stability measurement of synchrotron radiation

Hard X-Ray Transmission Curved Crystal Spectrometers (10–100 Kev) for Laser Fusion Experiments at the ShenGuang-III Laser Facility

Multiple Bent Crystal Reflections for Efficient Beam Collimation in Frontier Colliders