Abstract:The traffic scenarios that may cause extreme load effects are of great importance to the safety assessment of bridge structures. The traditional simulation method of traffic flow cannot depict the distribution pattern of vehicles on the bridge deck when the maximum effect is induced. In this paper, a probabilistic Gaussian mixture model (GMM) for heavy vehicle scenarios on the bridge deck under free-flow condition is proposed for long-span bridges based on collected Weigh in Motion (WIM) data. The scenarios of extreme response under free-flow occur more frequently than congestion scenarios and are of similar value and relevance in the daily management and safety assessment of long-span bridges. A non-stationary Poisson process is utilized to simulate the uneven occurrence of heavy vehicles in different lanes, and it is assumed that they are located within the artificially defined cells on the bridge deck. Then, Nataf transformation is employed to consider the correlation of gross vehicle weights (GVWs) within close range in the same lane. The numerical study is carried out on a long-span cable-stayed bridge to investigate the effects of correlation in GVWs and stationarity of vehicle distribution location on the structural responses. The load responses calculated by the proposed model and Monte Carlo method for different effects are compared with the values derived from code model. The results show that with the increase of the correlation level of the neighboring GVWs, the simulated responses are more prone to get extreme values, which means an increasing probability of the most unfavorable spatial distribution of on-bridge vehicles. The same results are also found under the non-stationary simulation state for vehicle location. The non-stationary Poisson process provides an efficient, highly feasible method, which is also in the safe side, for simulating the vehicle spatial distribution for specific effects.

Analysis and Prediction of Operating Vehicle Load Effects on Highway Bridges under the Weight Charge Policy

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Site-Specific Fatigue Load Spectrum for Urban Bridges

A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors

Analysis of dynamic load of vehicle bumping at bridge-head using distributed spring-damper element

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Multi-parameter Dynamic Traffic Flow Simulation and Vehicle Load Effect Analysis based on Probability and Random Theory

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Evaluating Probabilistic Traffic Load Effects on Large Bridges Using Long-Term Traffic Monitoring Data

Measurement-Based Vehicle Load Model for Urban Expressway Bridges

Probabilistic model of traffic scenarios for extreme load effects in long-span bridges

Dynamic Reliability of Continuous Rigid-Frame Bridges under Stochastic Moving Vehicle Loads

WIM-based vehicle load models for urban highway bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Investigation of multiple-presence factor for traffic loads on road-rail bridges based on a novel extreme value analysis approach

Vehicle Load Effect of Long-Span Bridges

Investigation of Highway Bridge Load Effect for Fatigue Reliability Analysis

Multi-Lane Traffic Load Clustering Model for Long-Span Bridge Based on Parameter Correlation

Reliability-based vehicle weight limit determination for urban bridge network subjected to stochastic traffic flow considering vehicle-bridge coupling

Vehicle survey and local fatigue analysis of a highway bridge

Adaptability analysis of load limit standard for prestressed hollow slab bridge